Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This 210 piece brass standoff kit insures you'll always have a set handy.
There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use …
These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 9…
These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. …
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and i…
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating …
"Rubber" feet raise your PCB or project up off your desk.
These rubber O-rings have an outer diameter of 55mm, inner diameter of 45mm and wire diameter of 5mm.
These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw.
These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". Wh…
These 2" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When us…
These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 …
These 10" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". Whe…
Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the …
These aluminum hex standoffs are 0.750" (19.05mm) 3/4" long and tapped for a 4-40 screw.
**Description**: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed be…
A 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.
These 10" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06".…
These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic …
This is an M3 Hex nut for use with M3 screws.
This is a 4-40, 3/8in. Phillips head screw.
These nylon standoffs are 3/8" long and tapped for a 4-40 screw.
These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter l…
These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system. The idler A …
These are standard 4-40 zinc-plated nuts.
These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system or motorized …
This is a reflow compatible round steel spacer with an internal thread of M2.5.
These nylon standoffs are 3/4" long and tapped for a 4-40 screw.
These 8" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". …
This hardware kit consists of four each of M2 style nylon hex nuts and screws.
