Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. Passive…
The EM-506N5 GNSS module features high sensitivity, low power and ultra small form factor.
The Raspberry Pi AI Kit bundles an M.2-format Hailo 8L AI accelerator with the Raspberry Pi M.2 HAT+.
Want to try your hand at hot air rework? These assemblies are defective for various reason but contain a tested [ZED-F9P GNSS…
With the release of the Jetson Nano™ Developer Kit, NVIDIA® empowers developers, researchers, students, and hobbyists to e…
The SparkFun LED Project Kit is a great way to get started with programming and hardware interaction with the Arduino program…
The Walabot Starter is a small, programmable sensor tool that looks into objects using radio frequency technology sense the e…
The WE1010 from Weller is a powerful 70 watt soldering station that is perfect for passionate hobbyists, DIYers, and anyone w…
The Machine Learning and AI Concept Kit is a great starting place for the basics of predictive algorithms learned from histor…
These are simple flush cutters from Excelite that give you a way to cut leads very cleanly and close to the solder joint.
The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions.
The SparkFun Blues Wireless MicroMod Starter Kit provides every part needed to get you connected and start prototyping with t…
The Qwiic OpenLog kit includes everything you'll need to get up and running with the Qwiic OpenLog and the Qwiic Ecosystem.
This is the SparkFun Vernier Interface Shield, a simple add-on to give your Arduino the capability to interface with Vernier …
It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the…
The Kitronik Inventor's Kit for the Raspberry Pi Pico offers the perfect introduction to physical computing with the Pico.
The SparkFun IoT RedBoard Kit is intended to provide you with everything you need to get up and running with the IoT RedBoard…
Do you need to remove the oxidation and surface contamination from your soldering iron tip? The Solder Tip Polishing Bar allo…
This kit provides you with a MicroMod Base, two sensors, a joystick, and an OLED screen as well as all the cables you need to…
Powered by Raspberry Pi's RP2040 microcontroller, this board has the power to run all Tensorflow Lite Micro tiny machine lear…
The Binho Qwiic Interface Board makes it easy for you to interface your Binho Nova host adapter with up to four strings of Qw…
The SparkFun Qwiic Wireless Speaker Kit provides you with everything you need to make a wireless audio speaker.
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi …
These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing …
The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way.
Introducing the Auto-Digital Thermostat. The ADT6401 is a trip point temperature switch. Use the SPDT switches to set the tem…
Our RedBoards are great. But don't they sometimes seem a little **_BIG_**?! Enter **smôl**, a new range of boards which a…
The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth and WiFi enabled module.
These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing …
This 3KHz Piezo Alarm is a great option for when you need a loud audible alarm (or are just looking for a way to prank your f…
The SparkFun Inventor's Kit for Photon is a great way to get started in the fresh IoT world and WiFi development.
Temp&Hum Click carries ST’s HTS221 temperature and relative humidity sensor.
MIKROE Rec&Play Click is a digital voice recorder on a Click board™.
OOK RX Click is a wireless receiver that operates at the frequency of 433MHz (sub-GHz).
BATT-MON 2 Click is a compact add-on board representing a battery monitoring solution.
Force 3 Click is based on the FSR 400 series 34-00004 single zone Force Sensing Resistor IC from Interlink Electronics.
MIKROE eFuse Click is a compact add-on board that contains a programmable electronic power breaker.
3xBuck Click is a triple step-down (buck) converter Click board™.
MIKROE 7seg Click is an accessory board in mikroBUS™ form factor.
RN4870 Click carries the RN4870 Bluetooth® 4.2 low energy module from Microchip.
The Gator Tooth Clamp is an ultra low profile clamp, designed to be used in a variety of ways.
LoRaSerial is a pair of serial radio modems that simply passes serial back and forth over incredible ranges.
This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals …
Brushless 22 Click is a compact add-on board suitable for controlling brushless DC (BLDC) motors with any MCU.
DeviceDrive Click is a complete Cloud-on-Module solution with Wi-Fi functionality and an integrated PCB antenna.
Current 6 Click is a compact add-on board providing a precise and accurate current sensing solution.
Who doesn't love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor la…
The AD-013 fingerprint sensor module is a combination fingerprint scanner and MCU and provides a UART interface port for easy…
