GPS/GNSS Buying Guide

Size

This is something you need to consider if your project is supposed to be pocket-sized. GPS and GNSS modules are getting ever-smaller (Your tiny, tiny cell phone has one in it!) but remember that in general, the antenna has to shrink to fit the module which will affect things like lock time and accuracy.

Update Rate

The update rate of a GPS or GNSS module is basically how often it recalculates and reports its position. The standard for most devices is 1Hz (Only once per second). The fact is, unless you're on an airplane or something, you're probably not going fast enough to have changed position significantly in the past second. However, UAVs and other flying or fast vehicles may require faster update rates to stay on track. 5 and even 10Hz update rates are becoming more and more available for cheap. Keep in mind, though, that a fast update rate means that there's more NMEA sentences flying out of the module, some microprocessors will be quickly overwhelmed trying to parse that much data. On the plus side, if you have a module that runs at 5 or 10Hz, it can usually be configured to run at an easier pace.

Power Requirements

If someone asked you to crunch a bunch of numbers that you had to get from satellites in orbit around the Earth and use that information to figure out where you were, you'd flat out refuse. It's a lot of work, and yet that's exactly what these tiny GPS/GNSS units are doing (multiple times per second!) so they can use a lot of power. On average, around 30mA at 3.3V. Keep in mind, also, that GPS antennas usually enlist the help of an amplifier that draws extra power. If a unit appears to have super-groovy-low power consumption, make sure there's an antenna attached.

Number of Channels

Even though there are only so many GPS/GNSS satellites in view at any given time, the number of channels that your module runs will affect your time to first fix. Since the module doesn't know which satellites are in view, the more frequencies that you can check at once, the faster you'll find a fix. After you get a lock, some modules will shut down the extra blocks of channels to save power. If you don't mind waiting a little longer for a lock, 12 or 14 channels will work just fine for tracking.

Antennas

Many modules come with this chunk of something on top of it. What is that? That is a precisely made chunk of ceramic. Each antenna is finely trimmed to pickup the GPS L1 frequency of 1.57542 GHz. Sound expensive? Well, they make a lot of them. There are some other GPS antenna technologies (chip, helical), but they are not as common, a bit more expensive, and require significantly more amplification and filtering.

Oh hey - as I mentioned, the satellites are in the sky like... 12,552 miles above you, so be sure and point the ceramic towards the sky, ok? GPS and GNSS antennas are getting better, and you can certainly get a signal indoors, but it's hit-or-miss. I hear there are reception problems in the urban canyons of places like New York City. If you can get near a window - it will help a lot.

Accuracy

How accurate is GPS and GNSS? Well it varies a bit, but you can usually find out where you are, anywhere in the world, within 30 seconds, down to +/- 10m. Amazing! I say +/- because it can vary between modules, time of day, clarity of reception, etc. Most modules can get it down to +/-3m, but if you need sub meter or centimeter accuracy, it gets really expensive. I've heard stories of such fabled receivers, but I have never gotten to touch one. Someone please prove us wrong.

What is GNSS?

So you’re wondering what the difference is between GPS and GNSS? Good news, you’re not alone and you’ve come to the right place! The topic of GPS vs GNSS can be confusing for many people. The main reason for this is that in the US, we tend to use a specific GNSS called GPS. You can learn more in our article explaining each of the world's geospatial satellite constellations!