Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 12
Wish List

JST SH Jumper 6 Wire Assembly - 8"

This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.

  • 8" length

Tags

JST SH Jumper 6 Wire Assembly - 8" Product Help and Resources

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

1 Soldering

Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Julien Vanier / about 9 years ago / 1

    Remember to verify the pin position. Don't assume that the black wire is pin 1. On the GPS Receiver - GP-735 the black wire is pin 6!

  • Member #396468 / about 12 years ago / 1

    These wire harnesses are super convenient - thanks Sparkfun! However, be aware the insulation on these wires is of very low quality and easily melts when using a heatgun on shrink-tubing.

  • Member #367538 / about 12 years ago / 1

    Can you get a cable with both a female and male connector that is JST SH compatible?

  • Mr. Bell / about 13 years ago / 1

    What is the spacing between the holes?

  • plejad / about 13 years ago / 1

    Can the connector be reflow soldered? The datasheet says something about a -25° to 85° range...

  • artk / about 13 years ago / 1

    I missed that these are spaced on 1mm centers. You might include that in the description more obviously.

  • GB / about 14 years ago / 1

    Any recommendations if someone needs (say) 6' of wire instead of 8"? Can you recommend a crimper and pins or maybe you would make custom cables if a minimum order quantity was met?

    • RobertC. / about 14 years ago / 1

      We don't do custom cables. We are working on a kit for making custom cables. We have SOME crimp pins, some crimpers, etc. Check here for cable housings and pins:
      http://www.sparkfun.com/categories/91?page=2

Customer Reviews

No reviews yet.