- Home
- Product Categories
- Irons and Tips
- Soldering Tip - Hakko - Chisel (T18-D16)
This is a replacement soldering tip for the Hakko FX-888DX soldering iron. This is the chisel type of soldering tip that comes with the Hakko. Replacing the tip is very easy - once the iron is cool, simply unscrew the shield, slip the replacement tip in, and screw the shield back on.
Note: This is the tip that ships with the FX-888DX.
Soldering Tip - Hakko - Chisel (T18-D16) Product Help and Resources
How to Solder: Through-Hole Soldering
September 19, 2013
This tutorial covers everything you need to know about through-hole soldering.
How to Solder: Castellated Mounting Holes
May 12, 2015
Tutorial showing how to solder castellated holes (or castellations). This might come in handy if you need to solder a module or PCB to another PCB. These castellations are becoming popular with integrated WiFi and Bluetooth modules.
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
5 out of 5
Based on 1 ratings:
If you can only get one soldering iron tip... this is the one
Small enough for fairly fine work, but with enough surface area to heat quickly, this is a great all-around general purpose tip. The chisel shape makes it easy to control solder flow.
they are out of stock ,any date when they will become available ?
The Dimensional Drawing link is not quite right I get this when I click on it:
AccessDenied
Access Denied
28B3AF6F1812D2BD
−
3ox9hQ9g1lnsObEgiQwYVty7cusYbfeTNx6QcbcoExBgkCDK/D+nmRA/u+J7prqe
According to Hakko USA "The T18 tip series is a direct "drop in" replacement for the current 900M series tips and can be used with the Hakko 907 iron on the 936, 937 and 928 soldering stations."
Best tip I've ever used.
Dimensional Drawing is 404ing...
Thanks for pointing that out! Getting that fixed now.
D'oh. Well you can find them all at the Hakko page for T18 tips anyway. T18-D16
This tip fit my 907 just fine and I like using it way better than the fine point that came with it.
Will these tips fit the Hakko 907 Iron? I have an older Hakko 936 Station.
From the model number I would say yes. The T18 series is supposed to be a replacement for the 900 series. The D16 suggests the tip is 1.6mm
I can confirm these will work with the Hakko 907 iron. I rolled the dice and ordered one and it is the exact tip that I replaced.
Have same problem, can't see drawing, Access Deinied...