Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio
  • Home
  • Luxeon Rebel LED Breakout - White Triple Play

Creative Commons images are CC BY 2.0

Favorited Favorite 0
Wish List

Luxeon Rebel LED Breakout - White Triple Play

Replacement: None. We are no longer carrying this LED Breakout in our catalog. This page is for reference only.

This is a simple breakout board of three high-intensity Luxeon Rebel LEDs - all white in color. This latest version is built with even brighter LEDs than the last!

This breakout board fits both our narrow and wide triple-LED lenses, the drill holes and LED placements fit those lenses perfectly.

These lights are extremely bright, with supply currents between 350mA and 700mA. The board can therefore dissipate close to 6.5W. A heatsink is recommended (check below).

A mating driver board is now available! (see below)

Replaces:BOB-09737

  • [Schematic](http://www.sparkfun.com/datasheets/Components/LED/Rebel 3-pack v11.pdf)
  • [Eagle Files](http://cdn.sparkfun.com/datasheets/BreakoutBoards/Rebel 3-pack v11.zip)
  • Datasheet (LMXL-PWC1-0120)

Luxeon Rebel LED Breakout - White Triple Play Product Help and Resources

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

2 Soldering

Skill Level: Rookie - The number of pins increases, and you will have to determine polarity of components and some of the components might be a bit trickier or close together. You might need solder wick or flux.
See all skill levels

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #252563 / about 13 years ago / 1

    Can I hook this up to an Arduino and run it with a 9 volt battery pack?

  • SomeGuy123 / about 13 years ago * / 1

    I don't understand why you have thermals around the thermal pads. Doesn't that defeat the purpose of the heatsink plane?

    • hurley_108 / about 13 years ago / 1

      Exactly. All the heatsinking in the world, and all those vias are for nought if the heat has to go through the board.
      Hey SparkFun people, howabout an answer on this?

  • hurley_108 / about 13 years ago / 1

    Is this an old picture, or is the thermal pad still thermally isolated from the pour?

  • jepler / about 13 years ago / 1

    You could probably go ahead and update the text to reflect the fact that the heatsinks and driver boards have been available for an age.

Customer Reviews

No reviews yet.