- Home
- Product Categories
- Gears
- Gear - Pinion Gear (16T; 6mm Bore)
Gear - Pinion Gear (16T; 6mm Bore)
These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 16 teeth with a gear pitch of 32P, an outer diameter of 0.563”, and a bore of 6mm.
Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.
- Teeth - 16T at 32P
- OD - 0.563”
- Bore - 6mm
- SketchUp Part
- Product Page (615258)
Gear - Pinion Gear (16T; 6mm Bore) Product Help and Resources
Core Skill: Robotics
This skill concerns mechanical and robotics knowledge. You may need to know how mechanical parts interact, how motors work, or how to use motor drivers and controllers.
Skill Level: Noob - You will be required to put together a robotics kit. Necessary parts are included and steps will be easy to follow. You also might encounter basic robotics components like bearings, mounts, or other hardware and need a general idea of how it goes together.
See all skill levels
Core Skill: DIY
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
4 out of 5
Based on 1 ratings:
it's not the same gear as an advertised in the picture .it's a different brand but it's good
If you guys come up with a 14T, 6mm or .25" bore, 10DP gear, I'll buy four of them right off the bat. The most common self-propelled lawn mower wheels are 8" with 10DP 53T, cheap, solid, and with a nice heft. But the best motors to drive them with any torque are the ones with 6mm shafts. Surprisingly hard to find a 6mm bore gear in 10DP, but it's pretty perfect for a bigger bot.