SparkFun Qwiic Starter Kit for Raspberry Pi

Ready to get started with Raspberry Pi and Qwiic? The SparkFun Qwiic Starter Kit for Raspberry Pi includes the Sparkfun Qwiic pHAT v2.0 for Raspberry Pi, which adds four Qwiic connectors to your Pi. It also includes a VCNL4040 Proximity Sensor Breakout, Micro OLED Breakout, Environmental Combo breakout and plenty of Qwiic Cables to connect everything together!

The Qwiic system makes I2C on your Raspberry Pi a breeze. All you need is a Raspberry Pi with a 2x20 GPIO header to plug the HAT into. This kit can also be used with the NVIDIA Jetson Nano Developer Kit and Google Coral Development Board, since they utilize the same 2x20 GPIO header! Make sure to check the Includes Tab to see everything that comes in the box!


The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.


Revision Changes: With this revision of the SparkFun Qwiic Starter Kit for Raspberry Pi, we have swapped out an individual board inside the kit, listed below. If users are unsure about which version they purchased, please refer to the product pictures.

SparkFun Qwiic Starter Kit for Raspberry Pi Product Help and Resources

Working with Qwiic on a Jetson Nano through Jupyter Notebooks

April 23, 2020

We created a few Jupyter Notebooks to make using our Qwiic boards with your Jetson Nano even easier!

Core Skill: Programming

If a board needs code or communicates somehow, you're going to need to know how to program or interface with it. The programming skill is all about communication and code.

3 Programming

Skill Level: Competent - The toolchain for programming is a bit more complex and will examples may not be explicitly provided for you. You will be required to have a fundamental knowledge of programming and be required to provide your own code. You may need to modify existing libraries or code to work with your specific hardware. Sensor and hardware interfaces will be SPI or I2C.
See all skill levels


Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #411720 / about 3 years ago / 1

    I designed a case for the Raspberry pi with the QWIIC PHAT and a support board to keep the QWIIC components in place. You can see it at https://www.thingiverse.com/thing:5172714

Customer Reviews

5 out of 5

Based on 1 ratings:

Currently viewing all customer reviews.

A breeze to get up and running

And lots of fun to play with