- Home
- Product Categories
- Development Tools
- ATMega128/103 Bare PCB
ATMega128/103 Bare PCB
Replacement: None. We are no longer carrying this PCB for the ATMega128/103 in our catalog. This page is for reference only.
A breakout board for the popular ATMega128 micro controllers. These are very nice PCBs with the AVR STK programming port, JTAG Debugging Port, and lines for power regulation. Please see schematic for specifics.
Supported Devices:
- ATMega128
- ATMega128L
- FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
- Extension pin headers for each uC pin
- 47x47 mm (1.85x1.85")
ATMega128/103 Bare PCB Product Help and Resources
Core Skill: Soldering
This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.
Skill Level: Competent - You will encounter surface mount components and basic SMD soldering techniques are required.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
If you leave out R2 and re-label CON PIN 1 from *PEN to PG5 you can use this board for the atmega2561 and atmega1281 processors as well as the atmega128 and atmega64.
I got atmega128L 8ai 0608 microcontroller, wil this work for my microcontroller? guys this is my first project so please help me.
It should work fine.
I have used a lot of these boards, and they are quite nice.
Is it just me or are the JTAG pins missing?
Yes, it seems like the picture is a prototype. Here is an image of the (green) version with the JTAG in place. http://www.shop.kristech.eu/product_info.php?cPath=22_38&products_id=55&language=EN
Don't suppose there is a chance you will be getting the microcontrollers to go with this board anytime soon?