3D Download: Sketchup, STL, Blender

SparkFun SSOP to DIP Adapter - 16-Pin

8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made these 0.635mm devices fit just fine. Can be used with packages from 0.200" (5mm) up to 0.450" (11.4mm) in width.

40 Pin break-away headers are perfect for use with these custom PCBs. Machine pin headers may be a better option for IC sockets. Pad layout fits all standard SSOP .65mm and can accommodate .635mm pitch devices.

  • 8-pin: 0.6 x 0.4" (15.24 x 10.16mm) 500mil DIP spacing
  • 16-pin: 1.0 x 0.4" (25.4 x 10.16mm) 400mil DIP spacing
  • 20-pin: 0.8 x 1.0" (20.32 x 25.4mm) 700mil DIP spacing
  • 28-pin: 1.4 x 0.7" (35.56 x 17.78mm) 600mil DIP spacing.

SparkFun SSOP to DIP Adapter - 16-Pin Product Help and Resources

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

3 Soldering

Skill Level: Competent - You will encounter surface mount components and basic SMD soldering techniques are required.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • BillBrownWB8ELK / about 11 years ago / 3

    Any chance you will produce more of these laid out in the correct fashion (pins 1-8 not in reverse order)? Although usable if you are careful to invert your pin 1-8 wiring and mess with your mind in the process, it would be much better if you correct this very non-conventional and incorrect layout. Please bring back the old green SSOP boards and keep those of us who do breadboard prototyping in mind.

  • BillBrownWB8ELK / about 12 years ago * / 2

    I bought some of these some years ago (green color board). They were perfect for my prototyping use and brought out the SSOP pins to a DIP compatible format that would plug right into a DIP socket or solderless breadboard. However, these new boards aren't the right width for a DIP socket anymore but will work in a solderless breadboard. Why would you lay out the DIP pins with pins 1-8 in a reversed and non-conventional order in this newer rendition? A classic case of newer but not improved. Do you still have the old green boards that worked great in stock anymore? I'd be interested in buying those old boards.

  • pburgess / about 15 years ago / 2

    What happened? The adapter board I received was a different size and layout than the one depicted here; 400 mil spacing, and with the resulting DIP pin order being a complete mirror image of what one would normally expect. But at least there were no traces in the overhang and it could be ground down to a reasonable size. It's like one less-than-perfect design was changed to a different but equally less-than-perfect design.

  • Member #533067 / about 9 years ago * / 1

    Agree with everyone here: I bought these some time ago and threw them in my parts bin. I just broke them out to use and saw the crazy pinout. Well past any exchange date now, but had I noticed the difference (and who would ever even look, because who would ever lay one of these out non-standard?) I would never ever have bought this, and I'll never buy this again. Why don't you fix it and offer a new product, and why haven't you even responded to all these people who have a very valid grievance? You guys are better than this!

  • Lotharyx / about 10 years ago * / 1

    Two people have commented about the nonstandard routing which reverses pins 1-8, and those comments have not received any official replies. The 8- and 28-pin TSSOP adapters are correctly routed. When can we expect to see a useful, non-headache-inducing (and potentially silicon-destroying), sane version of this adapter?

    As an aside, it's also silly not to make it fit a DIP socket (assuming the pin reversal is are corrected).

    As a further aside (and perhaps to help get some official attention on this subject), sense-making adapters are available from Adafruit: http://www.adafruit.com/products/1207

  • Advancer / about 11 years ago / 1

    Will a 14-TSSOP fit this board?

    • Kamiquasi / about 11 years ago / 1

      As long as your part fits the pitch, pin length, etc. that should be fine :)

  • Member #390642 / about 12 years ago / 1

    Would a AD7746 CDC fit correctly on this board? I'm looking to breakout the AD7746. Thanks!

  • whitnasty / about 12 years ago / 1

    Will these BoB's fit a TSSOP part? Like the TI ADS7828 ADC? The pitch of the pins is correct, but I am not sure about the width, just the body of the IC is 4.5mm but the distance across from the end of the leg to the end of the leg on the other side is 6.6mm. It says it will fit parts that are a minimum of 5mm but I am unsure as to whether this is the body only or from lead to lead? Thanks very much for the help!

  • burners / about 14 years ago / 1

    Sparkfun can we get some QSOP & ?MAX to DIP boards? I have several QSOP & ?MAX sample chips I got from MAXIM I have been dying to use but need to put them on a breakout board so I can play with them before designing a circuit to use them in. Most of the chips are QSOP 16 Pin. If you can only add one at a time please add QSOP 16 Pin first.

  • N.Poole / about 14 years ago / 1

    ...hm.
    think I could put an SC70 on it?
    I've got a fairchild led driver that I can't do anything with til I find a way to break it out. lol

    • N.Poole / about 14 years ago / 1

      actually I'll buy the 8-pin one (my SC70 is a 5-pin package) and just give it a shot... I might be able to drag the traces in with a silver pen if necessary...

  • Luc / about 14 years ago / 1

    the labeling on the board I received is stupid, as is the layout: To get the pin numbers to wind up the same as the soic, I had to set it up chip side down. The labels on the silkscreen layer go:
    16.......
    .......1
    they are wrong even if you put it in dead bug style.
    usable, but ignore the silkscreen, and use it with the soic hidden.

  • orluke / about 15 years ago / 1

    This is a useful little breakout board, but pin ordering is contrary to convention. Pins 1-8 are in the reverse order of what one would expect. The pin labeling in the silkscreen is accurate, so it isn't too confusing to work with. I received a red PCB.

Customer Reviews

2.3 out of 5

Based on 3 ratings:

Currently viewing all customer reviews.

3 of 3 found this helpful:

Not quite right.

When you convert to a DIP pattern, pins 1 and 16 are opposite not diagonally opposed. I have never seen a DIP with the pinout used on this board. Why not just use the standard?

1 of 1 found this helpful:

It's wrong - but works. Meh.

This works - BUT, you better make sure your DIP pattern is right on your PCB to match it. It's not a standard IC pattern at all. Not only does it not match a normal DIP pattern (u pattern numbering), it also doesn't match the 0.3" spacing its supposed to. It is 0.4", so if you use 0.3" your out of luck. Make sure you use Sparkfun's brd file, since it shows the 0.4" - NOT the 0.3 they claim,

Worst design ever

The pin layout is wrong!!!! Don't buy this!!! Waste me a lot of time!!!

Sorry to hear that you had an issue with this design. Please contact us if you would like a return. https://www.sparkfun.com/returns