Prototype Board for MSP430F1121

Replacement: None. We do not have a direct replacement for this board. This page is for reference only.

Prototype board for MSP430F1121 microcontrollers with power supply circuit, crystal oscillator circuit, JTAG port.

**Processor: ** MSP430F1121

  • FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
  • JTAG connector
  • JTAG Power_In and Power_Out jumpers
  • TEST pin pull-down
  • RST/NMI pin pull-up
  • Power supply connector for battery +3V
  • 32.768 kHz crystal oscillator
  • Extension slot on every uC pin
  • Grid 100 mils
  • Two mounting holes
  • GND bus
  • Vcc bus
  • 59x44 mm (2.3x1.7")

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.