- Home
- Battery Holder - 4xAA Rectangle
Battery Holder - 4xAA Rectangle
Simple 4 cell AA battery holder with 5" tinned leads, rectangle configuration.
Battery Holder - 4xAA Rectangle Product Help and Resources
Core Skill: Electrical Prototyping
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Noob - You don't need to reference a datasheet, but you will need to know basic power requirements.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
It is very tight indeed.
And 6v is not enough to run a 5v regulator btw, that was a bummer... Still open for ideas though.
It depends on what regulator you use. Many 5v regulators will accept 5.5v input.
This battery pack is pretty horrible. The springs on the two I used pushed the plastic apart such that the batteries no longer touched each other after a few weeks.