This product has shipping restrictions, so it might have limited shipping options or cannot be shipped to the following countries:
Replacement: None. We are no longer carrying this product in our catalog. This page is for reference only.
Development platform for the STR750 ARM7 processor.
STR750 * Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG * USB 2.0 device port * 3x RS232 interface and drivers * 3x Buttons * Trimmer potentiometer * Nokia 6610 TFT COLOR LCD display 128x128 pixel 12 bit color with backlight * UEXT - 10 pin extension connector for Olimex addon peripherials like MP3, RF2.4Ghz, RFID etc. modules * On board voltage regulators with up to 800mA current * Single power supply: 6-9VDC required * Power supply LED * Sower supply filtering capacitor * Reset circuit * Reset button * 4MHz crystal * PCB: FR-4, 1.5 mm (0.062"), soldermask, silkscreen component print
** Documents****:**
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
No reviews yet.
Doesn't have the following:
4x optoisolated inputs
2 RELAYS 10A/250VAC
(those are on the STR730 board)
And it only has drivers for 2 RS232 ports. The data lines for the third port run to the UEXT connector (and don't have drivers).
Noticed the typo?
(I found it while searching for a nunchuck adapter)