Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 0
Wish List

PICAXE 08M Microcontroller (8 pin)

Replacement:COM-10803. We no longer carry this chip. We now carry the 08M2 in its place. This page is for reference only.

PICAXE-08M microcontroller chip. Supports 5 input/outputs including 3 analogue inputs.

PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some excellent educational applications and support, and is a great entryway into more complicated embedded systems. If you're looking for a place to start with microcontrollers, PICAXE is a great way to go!

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • nutz4hs / about 16 years ago / 2

    I'm not new to picaxe, i've used the 18 pin ver on a 360 hack before, but nothing to really mess with, i have used basic stamp, arduino and vex but pic has to be one of the easiest and smallest, this chip is perfect for standalone projects, 5 pins doesn't sound like enough, but to think that the only external piece this needs after programming is a 5 volt source, it can easily fit in to any tiny project, and budget.

  • Member #24839 / about 17 years ago / 2

    WOW! My first foray into microcontrollers was with this part and I am SOOO happy. The use of BASIC programming language, the great (free) manuals, and the great (free) development environment made it all possible.... especially since I never learned C-coding. I successfully made a sophisticated alarm to tell when the kids leave the bathroom light on (with different alarms, a pause button, a battery save mode, etc. etc.) Great part and I am very happy with it.

  • Krb686 / about 13 years ago / 1

    ^^ Agreed ^^ And also, the M2 line of PICAXE's is out as everyone already knows, which would be great if stocked here :D

  • Young Maker / about 14 years ago / 1

    Maybe sparkfun could get the SMD version of these, to try out SMD soldering for the first time?
    Thanks

  • mman1506 / about 14 years ago / 1

    i use this in grade 6 to great a simple robot that drives around on 2 wheels and i have now graduated to arduino system. it is easy to program and basic is easy to use. highly recommend for any body starting with microcontrollers

    • IllogicGate / about 14 years ago / 1

      Hey, I'm in 6th grade too! I shouldn't have bought an ATTiny85 before finding out about this. I'm makin' a line follower.

      • IllogicGate / about 14 years ago / 1

        Oh wait I'm in 5th grade because I was born in January. I like the Arduino too, it was my first really programmable device.

  • Ivan747 / about 14 years ago / 1

    3 analogue inputs? I though you where americans. Anyway this thing is great for starting. Possibilities are endless. It can handle a servo, or a PWM pulse while receiving data from a Sony remote (using the SIRC protocol). One of the coolest projects i have done with 5 i/o pins is a remote controlled light dimmer. Well, LED dimmer, wich could be easly adapted to drive a big load conected to the mains.

  • slinger / about 15 years ago / 1

    I am a little confused with this product. The data sheet says it has a serial out and serial in but can these be used as a UART (tx/rx)? I need this to communicate with a serial RFID reader at 2400 baud.

    • Ivan747 / about 14 years ago / 1

      Yes you can. Look on the guide #2 for the commands "serin" and "serout".

  • WHI / about 15 years ago / 1

    Great price, but one thing to consider - the datasheet for this part shows you can go to a clock frequency of 8 MHz. However due to the BASIC compiler/assembler the instruction cycle time is considerably slower. Fastest high to low output transition I could achieve was 400 micro seconds at 8 MHz CPU clock. Trying to do something with MIDI (need 32 u-sec) but this chip is completely inadequate in this regard, maybe there's a way but I haven't found it yet. Guess I'm going to have to go with the assembly code & the standard PIC and cough up some cash for the programmer....

  • PresidentOfAwesomeness / about 15 years ago / 1

    Is this pre-bootloaded?

    • Greeeg / about 15 years ago / 2

      Yes, just connect it via serial to a PC, write some BASIC code, upload. very simple and straight forward.

  • RoboKaren / about 15 years ago / 1

    I graduated to the PICAXE from the Basic STAMP and couldn't be happier!! Instead of $30~40 a chip, I'm paying an amazing $3 for something that has more features (full time PWM; 10 bit ADC). If I need all the inpus, I just get the 14 or 18 pin versions.
    Fantastic! I can put PICAXEs everywhere!

Customer Reviews

No reviews yet.