- Home
- Breadboard - Mini Self-Adhesive Black
Breadboard - Mini Self-Adhesive Black
Replacement:PRT-11662. These have been replaced by a new modular version! This page is for reference only.
This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield shown below. Strong, self-adhesive backing. Measures 1.8"x1.4"
Check out our Unregulated Power Supply Tutorial!
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
Do these have top and bottom horizontal rails (looking at the second image) like the larger conventional breadboards?
They don't, in a board this small you might as well just use a row.
These are great, but I have one question: What's the best sort of wire to use with them?
I've got some wires from an old Radio Shack kit (the ones with all the springs), but they feel a little loose.
Just wondering if there's a best gauge to use, and if tinned stranded wire is better than solid.
I've always used ethernet twisted pair plenum wire. Plenum CAT5 is 24 AWG solid, whereas the flexible stuff you have in your patch cables is stranded. A 25' piece will last you a few years.
Hey, great suggestion. I'll try to find some!
In my experience the 22 AWG we carry works great. Also use the solid wire, the stranded doesn't work as well.
Yeah, definitely! I tried several times unsuccesfully to put the stranded wires from a 9v battery clip into one of these breadboards. The tinned-ness had come off, too. The Devil must have infested those wires.
I ment close after so but oops I screwed up.
I used this with the PICAxe 8 pin proto board. But it dosen't fit but it is close to but so advice, it works well to the side or posibly at thebottom of the board.