Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio
  • Home
  • Audio Jack Breakout

Creative Commons images are CC BY 2.0

Favorited Favorite 0
Wish List

Audio Jack Breakout

Replacement:PRT-10588. The new revision corrects the board layout so that the silkscreen is correct. This page is for reference only.

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.

****Note: ****This is for the bare PCB only.

Note: The silkscreen is incorrect. We are working on a revision. However, the board is still usable, but the labeling isn't even close to correct. Here is the correct pin labeling (from top to bottom):

  • GND (Ground)
  • RNG (Ring)
  • RSH (Ring Shunt)
  • TIP (Tip)
  • TSH (Tip Shunt)

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • rebelzach / about 14 years ago / 1

    Seriously! I just ran into this issue as well. It would have been nice to have a little correction paper in the box at least.

  • FredP / about 14 years ago / 1

    The proper pinout from top to bottom should read:
    * GND (Ground)
    * RNG (Ring)
    * RSH (Ring Shunt)
    * TIP (Tip)
    * TSH (Tip Shunt)
    Basically, the only label they got right is ground.
    Hey, Sparkfun, how about posting an errata here on the site and including one with your order if you buy the part? Is it really necessary to make everyone do the work of breaking out the continuity checker to determine that the board is pretty much completely mislabeled?

  • unitof / about 14 years ago / 1

    wendyju: This board is great, but it's important to know that the RNG (ring) and TIP are mislabelled as RSH (ring shunt) and TSH (tip shunt), respectively.<br /><br />
    <br />
    Sorry, I'm confused as to exactly what is mislabeled. Are you saying that RSH needs to be switched with RNG and TSH needs to be switched with TIP? Or am I missing something?

  • wendyju / about 15 years ago / 1

    This board is great, but it's important to know that the RNG (ring) and TIP are mislabelled as RSH (ring shunt) and TSH (tip shunt), respectively.

    • Jeremypg399 / about 15 years ago / 1

      Thank you so much. I wish I had read this sooner. I had already soldered the board on. I guess it is time to break out the desoldering pump and wick!

Customer Reviews

No reviews yet.