This will allow me to build a "functional" prototype once I work out the code. This way I can test the code and make sure I'm on the right track.
Product | Subtotal | Qty | |
---|---|---|---|
SparkFun FTDI Basic Breakout - 5V
DEV-09716 |
16.5 | 1 | |
Break Away Headers - Straight
PRT-00116 |
1.75 | 1 | |
SparkFun Environmental Sensor Breakout - BME680 (Qwiic)
SEN-16466 |
18.95 | 1 | |
Breadboard - Full-Size (Bare)
PRT-12615 |
6.5 | 1 | |
Jumper Wires - Connected 6" (F/F, 20 pack)
PRT-12796 |
2.1 | 1 | |
Jumper Wires - Connected 6" (M/M, 20 pack)
PRT-12795 |
2.1 | 1 | |
SparkFun RJ45 Breakout
BOB-00716 |
1.05 | 1 | |
RJ45 8-Pin Connector
PRT-00643 |
1.6 | 1 | |
Arduino Pro Mini 328 - 5V/16MHz
DEV-11113 |
10.95 | 1 | |
Smoke Sensor - MQ-2
SEN-17049 |
5.5 | 1 | |
Humidity and Temperature Sensor - DHT20
SEN-18364 |
6.5 | 1 | |
Magnetic Door Switch Set
COM-13247 |
3.95 | 1 | |
SparkFun Solder-able Breadboard - Mini
PRT-12702 |
3.5 | 1 | |
Total: 80.95 |