Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
The EM-506N5 GNSS module features high sensitivity, low power and ultra small form factor.
With a clear view of the sky, the Satellite Transceiver Breakout - Swarm M138 allows you to send and receive short messages.
The SparkFun Blues Wireless MicroMod Starter Kit provides every part needed to get you connected and start prototyping with t…
**Description**This is a Arduino-compatible autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using t…
The smallest, most powerful, and most versatile GPS receiver we carry just got more powerful. The Venus638FLPx is the success…
**Replacement:** None. We are no longer carrying this EM-408 GPS Receiver in our catalog. This page is for reference only. T…
Our UAV Development Board is back! The UDB5 (UAV Development Board version 5) comes populated with a dsPIC33FJ256 CPU, and th…
**Replacement:** None. Unfortunately the supplier for these helical GPS Receiver is no longer in business so we can no longer…
The GeoHelix antenna from Sarentel is a one of those really odd looking antennas. Block ceramic antennas have good gain, but …
**Replacement:** None. We are, unfortunately, no longer carrying this GPS receiver in our catalog. This page is for reference…
The EM-406A GPS receiver from [USGlobalSat](http://www.usglobalsat.com) based on the spectacular SiRF StarIII chipset. This c…
Combine the u-Blox chipset with [Sarantel's](http://www.sarantel.com/) powerful SL1206 helical antenna and you get the impres…
The S1315F SMD IC is a small form factor 65-channel GPS module solution intended for a broad range of OEM products, where fas…
The GP-2106 is a really tiny GPS module. It's so small, in fact, that it's almost too small to use. Not only that, but the 1.…
**Replacement:** None. There is no direct replacement for this item. This page is for reference only. The ML-7 is a truly co…
Magnet mount antenna for GPS modules operating at 3V. Designed for used with automobiles - the magnet will hold the antenna i…
**Replacement:** None. We are no longer building this board but check out the rest of our [GPS category](https://www.sparkfun…
This ZIF connector mates with the 6-conductor ribbon cable for the GP-2106 GPS module. Use it to roll your own GP-2106 carrie…
Horizontal surface mount connector for the EB-85A/FV-M8 GPS receiver.
The GP-635T is a slim GPS receiver with -161dBm tracking sensitivity and only 27 second cold start time. The slim design make…
That is a GPS chip antenna. Itty-bitty! And we were just as surprised when it picked up just as many satellites as the larger…
Surface mount vertical 5-pin 1.0mm pitch connector for connecting to the EM-408 interface cable.
This is the surface mount header that mates with the Lassen IQ. **Part #**: CLP-104-02-G-D [ www.samtec.com](http://www.samt…
**Replacement: **None. We're not selling these connectors anymore. This page is for reference only. This is the SMD connecto…
This is a Arduino-compatible autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using the new ATMega32…
**Replacement:**[GPS-11466](https://www.sparkfun.com/products/11466). This module has been updated to a u-Blox 6 chipset and …
**Replacement:**[GPS-11858](https://www.sparkfun.com/products/11858). We've released a new rev of this GPS module that fixes …
Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a…
**Replacement:** None. There is no direct replacement for this particular GPS module. This page is for reference only. This …
GNSS RTK Click is a compact add-on board used to enhance the precision of position data derived from satellite-based position…
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries.
This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board brea…
This 6-conductor ribbon cable mates with the connector on the bottom of the GP-2106 GPS module.
**Replacement:** None. We're no longer building this board but check out our [GPS evaluation boards](https://www.sparkfun.com…
Vertical 10 pin SMD connector for the GS406 GPS module.
**Replacement:** None. We are no longer carrying this product. This page is for reference only. This board from DIYDrones fe…
**Description**: The LS20031 GPS receiver is a complete 10Hz GPS smart antenna receiver, that includes an embedded antenna an…
GNSS 2 Click carries Quectel’s L76 module and an SMA antenna connector.
**Replacement:** None. While we don't carry a direct replacement for this module, have a look at our other modules in the [GP…
**Replacement:** None. There is no direct replacement for the KinetaMap. It had a good run, but it's time to go away. We stop…
**Replacement:**[GPS-09980](http://www.sparkfun.com/commerce/product_info.php?products_id=9980). The v3 board comes with a ds…
**Replacement:** None. We are no longer selling this GPS module, but have a look at the rest of our [GPS](http://www.sparkfun…
The GPS Logger V2.4 is the next generation of GPS Loggers from Spark Fun Electronics. v2.4 logs NMEA 0183 sentences to a stan…
**Replacement:** None. We don't carry a direct replacement for this module but check out the rest of our [GPS category](https…
**Replacement:**[GPS-08975](http://www.sparkfun.com/products/8975). We are no longer carrying the SUP-500 due to poor quality…
**Replacement**: [GPS-10921](http://www.sparkfun.com/products/10921). The new version of this board is built with the Venus63…
**Replacement:**[GPS-09436](http://www.sparkfun.com/commerce/product_info.php?products_id=9436). This module has been discont…
**Replacement:** None. We no longer carry this GPS antenna in our catalog. This page is for reference only. Ultra-compact em…
