Virtual Workshops for Embedded Machine Learning
We teamed up with Edge Impulse and a few of our friends to produce a series of virtual workshops to learn new machine learning skills and theory.
Back in April we started a series of workshops that focused on helping you master embedded machine learning all from the comfort of your own home! We partnered with our friends at HiMax and Nordic to help incorporate imaging and weather sensors, as well as our growing MicroMod product line, to learn how to collect data, build your first models, test and deploy them, and more! Both workshops filled up completely (to the point that we needed to increase the cap on one) so we wanted to share them with you in case you didn't have a chance to get in, or if you did attend but wanted to re-watch the VOD. Keep in mind for those of you that are going to be learning along with the workshops, each have their own, unique kit to pick up. Make sure to click the links below to visit each workshop page to find all the materials you need!
In this workshop, you'll learn how to classify different smells/fragrance with the Himax WE-I Plus board and the TVOC sensor from the SparkFun Qwiic Environmental Combination breakout. You will collect and train your machine learning model using Edge Impulse. Finally, you will deploy your own custom model back to the board and classify your samples in real time.
In this workshop, you'll learn how to classify different physical motions and body positions using the SparkFun MicroMod Machine Learning Carrier Board and the Nordic nRF52840 MicroMod Controller Board. You will collect and train your machine learning model using Edge Impulse. Finally, you will deploy your own custom model back to the hardware and integrate it with free Nordic mobile phone tools to get the data off of the board so it can be useful for development.
Make sure to check out these two workshops if you're interested in machine learning and have been looking for a way to learn more about it!
