Replacement:DEV-11262. The new version of this board is easier to snap apart! This page is for reference only.

The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.

The ProtoSnap LilyPad Development Board is designed to get you started in the world of e-textiles. Combining a LilyPad Simple Board with other LilyPad components like a buzzer, a vibration motor, an RGB LED, a button, a switch, five LEDs, a light sensor, and a temperature sensor, the ProtoSnap LilyPad Development Board lets you dive right into wearable electronics. When you’ve learned how to program the LilyPad Arduino Simple Board, break apart the components and explore the power of the LilyPad platform.

In this version, we've changed the labeling on the LEDs to make more sense. We've also connected the speaker to ground so that only one I/O pin is required to get the buzzer working!

Note: This kit does not include a USB cable. You will need a USB mini-B for the FTDI basic. Check below for an appropriate cable if you don't already have one.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features.

Included on the Board:

• 1 x LilyPad Simple Board
• 1 x LilyPad Button
• 1 x LilyPad Slide Switch
• 5 x LilyPad White LED
• 1 x LilyPad RGB tri-color LED
• 1 x LilyPad Light Sensor
• 1 x LilyPad Temp Sensor
• 1 x LilyPad Buzzer
• 1 x LilyPad Vibe board

Kit Also Includes:

• 1 x LilyPad FTDI Basic
• 1 x 110mAh battery
• 2 x Conductive Thread (60')
• 1 x Needle Set

Replaces:DEV-10506

• Schematic
• Eagle Files
• Getting Started Guide
• Example Arduino Sketch