ELastoLite Panel - 5x3 inches - Blue

These are blue 5" x 3" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, and with a little bit of assembly can be easily be applied to most articles of clothing.

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.

Note: Make sure you check out the Hookup Guide below for ELastoLite® tips and instructions.

Tags

ELastoLite Panel - 5x3 inches - Blue Product Help and Resources

Core Skill: DIY

Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.

1 DIY

Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels


Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Daragh O' Duffy / about 11 years ago / 1

    This is pretty cool (albeit slightly expensive) How bright is it? With the inverter is there anything special about it, could I make my own? Also how long does it last (battery and durability wise)? Sorry for all the questions! You guys are the best

    • Pearce / about 11 years ago / 2

      I've run the larger panel on the INV133 for over 10 hours (I left work before it died). As far as brightness goes, it's fairly bright for EL Material. It won't be noticeable in sunlight but it is noticeable in most other lightening conditions. If you're familiar with inverter design, I'd say it wouldn't be hard to make your own.

Customer Reviews

No reviews yet.