- Home
- Product Categories
- Enclosures
- Arduino Yun Enclosure - Clear Plastic
Arduino Yun Enclosure - Clear Plastic
The Arduino Yun is a great WiFi development board that combines the power of Linux with the ease of Arduino, why would you not want to keep your board safe and sound inside this clear plastic enclosure? These cases protect your Arduino Yun from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the Yun into the bottom half of the enclosure, then snap the two sides together.
As you may have noticed, these enclosures are actually transparent. The enclosures are perfect for letting you see your Arduino Yun and make any needed adjustments easily.
The enclosure provides slots to access each header, USB ports, ethernet jack, reset buttons, micro-SD card slot, the ICSP connector, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Yun are visible through the case thanks to light pipes embedded in the design. This is a really durable case that will do a great job protecting your Arduino Yun!
- 8 x 6.5 x 3 cm
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
5 out of 5
Based on 1 ratings:
Does what it needs to do
Good enclosure for the Yun. I probably have 7 or 8 of these by now.
This great but there are a couple of helpful hints. First, my Yun had some springy wings on the sides of the Ethernet connector. I found it easiest to cut them off. Second, a handy bit of plastic is included to reset the yun through the case. Careful, it's easy to throw it out accidentally, it's tucked in one side of the box the case comes in. Third, buy the header kit from Spark fun and use that to bring header access to the edge of the case. This makes hook up less of a hassle but also, most add on boards will not clear the Ethernet and USB Host connectors. The headers will solve that for you. It takes a little finagling to get the yun in ... that may be harder in the opaque model. I was glad for the see through.
Oh man, just bought this: https://www.sparkfun.com/products/11984 and modified to fit the Yun a month ago. I guess next time I will get this one.