- Home
- Product Categories
- LilyPad
- LilyPad E-Sewing ProtoSnap Kit
LilyPad E-Sewing ProtoSnap Kit
The LilyPad E-Sewing ProtoSnap Kit is a great way to incorporate buttons and switches into an e-textile project without any programming required. Like other LilyPad ProtoSnap series boards, the individual pieces of the included E-Sewing ProtoSnap are pre-wired --- allowing you to try out the function of the circuit before sewing. We have also included a CR2032 battery, needle set, conductive thread bobbin and a swatch of white felt. With all of these parts combined and the featured guide (found in the Documents tab), you will be able to plan and create fantastic projects straight out of the box!
The E-Sewing ProtoSnap includes three white LilyPad LEDs: two connected to a LilyPad Slide Switch and one connected to a LilyPad Button Board. A LilyPad Coin Cell Battery Holder with the included CR2032 coin cell battery provides all the power you need for the circuit. All you need to do is design how you want your project to be laid out, and then snap everything apart!
Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.
Note: Due to the requirements of shipping the battery in this kit, orders may take longer to process and therefore do not qualify for same-day shipping. Additionally, these batteries cannot be shipped via Ground or Economy methods to Alaska or Hawaii. Sorry for any inconvenience this may cause.
Included on the ProtoSnap:
- 1x LilyPad Coin Cell Battery Holder --- Switched
- 1x LilyPad Slide Switch
- 1x LilyPad Button Board
- 3x LilyPad White LED
Included in the Kit:
- 1x LilyPad E-Sewing ProtoSnap
- 1x Conductive Thread Bobbin
- 1x Coin Cell Battery --- CR2032
- 1x Needle Set
- 1x White Felt --- 100 Square Inch
LilyPad E-Sewing ProtoSnap Kit Product Help and Resources
Light-Up Plush
December 16, 2016
Craft a light-up plush with LilyPad LEDs controlled by pressing a button and sliding a switch in the creature's hands.
Getting Started with LilyPad
October 27, 2017
An introduction to the LilyPad ecosystem - a set of sewable electronic pieces designed to help you build soft, sewable, interactive e-textile projects.
LilyPad E-Sewing ProtoSnap Hookup Guide
December 7, 2017
Explore the LilyPad E-Sewing ProtoSnap and learn how to build it into a project.
Core Skill: DIY
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
Core Skill: Electrical Prototyping
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.