Why use a heatsink and a case, when you can use a heatsink case?! This red, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load. This case is great for situations where you want completely silent cooling, like home media centers.
It comes with a thermal pad to provide thermal contact between the CPU and top case, and a handy Allen Key and set of hex bolts to attach the case together.
The case gives you access to all of the ports, pins, and connectors. You can just about get away with using low-profile HATs and pHATs (those without bulky components on the underside) using one of our tall headers, but be extremely careful not to short any components on the metal top case!
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Based on 3 ratings:
1 of 1 found this helpful:
This arrived within 24 hours!! Installation was quick, and the temperature of my RPi 4 has not exceeded 51° after two weeks of use, including streaming 1080p video and opening multiple web pages.
It looks great and does a silent job keeping the RPi at normal operating temps.
Bravo!
This really is a great product for reducing the heat on the PI. I was running some AI training and the heat kept creeping up after just a few minuets of running the jobs. I decided I needed to protect the PI's so I purchased a couple of these heatsink cases and the temp holds steady now. the only thing I really wish is the description would provide the screw's sizes because I would like to get longer screws so I can mount the PI's in another case for my cluster.
It's a nice looking heatsink and seems to dissipate heat well but it is too snug around the GPIO pins for most ribbon cables. I didn't expect to fit a HAT with this heatsink in place but a standard 40 pin cable should not be a problem. I eventually used a metal hand file to shave off the plastic from both sides of my cable's connector, but it was still a tight fit. I would love to see a revision of this heatsink with a slightly larger opening around the GPIO pins.
Will your SparkFun Qwiic HAT for Raspberry Pi DEV-14459 fit on a Raspberry Pi 4 with this heat sink on it?
The Qwiic pHat will fit on top, but you be covering most of the radiator fins.