Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 2
Wish List

SparkFun ISP Pogo Adapter v2

Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attach them to an In-system programming (ISP) adapter, they become instantly better. This simple kit allows you to do just that. The ISP Pogo Adapter is a simple and easy way to adapt pogo pins to a 6-pin ISP header, allowing you to program an IC without soldering a header.

We've also included a labeled SIP header row and 10 6in. M/M jumper wires allowing you to use your Arduino (or other single-board microcontroller) as an ISP device!

This adapter comes as a kit, and assembly will be required.

Tags

SparkFun ISP Pogo Adapter v2 Product Help and Resources

Installing an Arduino Bootloader

December 4, 2013
This tutorial will teach you what a bootloader is and why you would need to install or reinstall it. We will also go over the process of burning a bootloader by flashing a hex file to an Arduino microcontroller.
Favorited Favorite 25

Tiny AVR Programmer Hookup Guide

October 28, 2013
A how-to on the Tiny AVR Programmer. How to install drivers, hook it up, and program your favorite Tiny AVRs using AVRDUDE!
Favorited Favorite 12

Pocket AVR Programmer Hookup Guide

July 7, 2014
Skip the bootloader and load your program directly onto an AVR with the AVR Pocket Programmer.
Favorited Favorite 10

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

2 Soldering

Skill Level: Rookie - The number of pins increases, and you will have to determine polarity of components and some of the components might be a bit trickier or close together. You might need solder wick or flux.
See all skill levels

Core Skill: DIY

Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.

1 DIY

Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Uniplast21 / about 3 months ago / 1

    What exactly makes this a “V2”? It’s identical to the original. The underside of the board even says “V10” just like the original. The only difference is that this kit does NOT come with the 1x6 pin header and wire loom the original one came with, despite having a place to solder one in, and this kit also comes with some jumper wires, but that’s it.

Customer Reviews

No reviews yet.