Resistor 330 Ohm 1/6 Watt PTH - 20 pack

1/6 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones).

These resistors come in bags of 20.

Resistor 330 Ohm 1/6 Watt PTH - 20 pack Product Help and Resources

Blynk Board Project Guide

March 25, 2016

A series of Blynk projects you can set up on the Blynk Board without ever re-programming it.

Cherry MX Switch Breakout Hookup Guide

April 21, 2016

How to assemble and use the Cherry MX Switch Breakout, allowing you to turn a matrix of mechanical switches into a full-size keyboard!

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

1 Soldering

Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels


Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

1 Electrical Prototyping

Skill Level: Noob - You don't need to reference a datasheet, but you will need to know basic power requirements.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Good Guy Sparkfun: Gives you extra resistors

    Just in case there aren't the right amount.

  • These are physically the same size as typical 1/8W resistors (body length is 0.2", overall length is 2"), and have a lead diameter of 0.015" (tiny!).

Customer Reviews

4.5 out of 5

Based on 2 ratings:

Currently viewing all customer reviews.

great resistors for leds

These little resistors are perfect as current limiting resistors for standard LEDs in a 5v system. I keep a 20 pack w/ my LEDs so I don't have to dig through all my resistors when I'm hooking up LEDs!

Great value!

These resistors were exactly what I needed and I didn't have to buy a huge assortment to get them.