×

SparkFun will be closed on Tuesday, November 5th to support our team in being able to go out and vote! Orders placed after 2 pm MT Monday, November 4th will ship on Wednesday, November 6th. Thanks for your patience and understanding.

SparkFun ClockIt (Retail)

This is the retail version of our popular ClockIt soldering kit. This is a great kit to learn the basics of soldering. ClockIt is a basic alarm clock with buzzer based on the ever popular ATMega328. If you're just learning how to solder, this kit should take you 15-20 minutes. If you're a weathered pro at soldering, this is a great relaxing build that should take 5-10 minutes.

We’ve made some changes to this kit so it’s easier for beginners to solder: The ATMega footprint is wider so you don’t need to bend any pins and we’ve also added some more silkscreen print to better indicate the polarity of the parts. We've also added a 5V/2A wall wart with this rev, you should have no issues with power any longer.

No programmer required. The ATmega comes with firmware installed!

  • 1 x ClockIt PCB
  • 1 x ATmega328 (pre-programmed)
  • 1 x 4-digit display
  • 1 x Piezo Speaker
  • 1 x 10uF cap
  • 1 x 0.1uF cap
  • 2 x 22pF caps
  • 1 x 10k resistor
  • 1 x 16MHz crystal
  • 1 x barrel jack
  • 1 x mini power switch
  • 3 x push button reset switches
  • 2 x Screws
  • 2 x Plastic Standoffs
  • 1 x 5V/2A wall wart
  • Time (AM/PM)
  • Alarm (On/Off)
  • Snooze (alarm resumes after a 9 minute snooze)

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.