SparkFun Cerberus USB Cable - 6ft

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The Cerberus.

The Cerberus is a three-headed cable-beast that will ensure that you're never stuck looking for a USB cable that fits your device. At one end of the Cerberus you have the standard A-type connector, which you can plug into your computer or USB power supply; At the other end are three common USB connectors: B, mini-B and micro-B.

The Cerberus can transfer both power and data just like any USB cable and now comes standard with a USB hub so you will be able to connect up to three data devices at the same time! Thanks to the improvements we made to this Cerberus no longer will you run into issues when transferring large amounts of data (hard drives, flash drives, etc) or connecting Android and other mobile devices.

If you're still trying to wrap your head around the world of USB cables, why not check out our USB Buying Guide?

Note: This idea originally came from our friend and favorite button maker in the Oakland area, CTP. If you see him, please give him a high-five for us.

  • Single USB-A Connector at Host End
  • USB-B, mini-B and micro-B Connectors at Device End
  • USB Hub
  • 6' Long

SparkFun Cerberus USB Cable - 6ft Product Help and Resources

Connector Basics

January 18, 2013

Connectors are a major source of confusion for people just beginning electronics. The number of different options, terms, and names of connectors can make selecting one, or finding the one you need, daunting. This article will help you get a jump on the world of connectors.

Wireless RC Robot with Arduino and XBees

March 12, 2019

In this tutorial, we will expand on the SIK for RedBot to control the robot wirelessly with XBee radios! We'll explore a different microcontroller and wirelessly control the RedBot at a distance.

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • eilatann / about 8 years ago / 2

    Came by to check if there was a USB C version yet, thought I'd stop to say that I love this cable to pieces (not literally) and keep buying them for different lab spaces. It's soooo nice not having to dig around for the right cable for the particular gizmo I'm using that day. Thanks for making it!

    • Member #445037 / about 7 years ago / 2

      Seconding the request for USB C to be added.

      • Member #1306418 / about 6 years ago / 2

        +1

        • BerenV / about 6 years ago * / 2

          I was going to request the same thing. This cable is seriously awesome, but it would be even better if it had a USB C pigtail and perhaps even a female USB port to plug in whatever other weird cable you need.

          • Member #152256 / about 5 years ago / 2

            Two requests, Type-C input, I have to use an adapter to connect this to my current computer Type-C output on fourth hub port.

            I'm not looking for a USB-PD capable adapter, just need legacy power support.

            • santaimpersonator / about 5 years ago / 2

              I definitely remember seeing something a while back. However, I'll ping the product catalog group just in case.

              • +1 for USB C version to replace the USB A (input) connector

                • floppystick6 / about 3 years ago / 1

                  +1 for USB-C It would be awesome if it had USB-C on the device side, and maybe even on the computer side.

                  The whole idea behind this cable was to carry this one cable and know that you can connect to whatever USB device/microcontroller you come across. Now with the popularity of USB-C, this cable no longer fits the bill. Its close, and I still use the three that I own, but the USB-C would make it complete again.

  • nerdyrcdriver / about 9 years ago / 1

    I keep a few of these around the lab for the robotics team that I am a member of. Recently we have kept one plugged into a computer for quick use. Today I happened to brush the hub with the back of my hand and realized that it was warm. Sure enough, I picked it up and it was too hot to hold. I immediately unplugged it and for some reason decided to smell it. It smells like something let the magic smoke out at some point. For $7 it doesn't seem worth talking to customer support about especially since I think we ordered them about 8 months ago.

  • IgnacioV / about 11 years ago / 11

    now comes standard with a USB hub

    YAY! wavy kermit arms

  • opensourcerer / about 11 years ago / 7

    I bought this cable under the impression that I would be receiving a USB cable in the mail. You guys never cease to surprise me, because when I opened the package, i found a gigantic hellish dog looking at me as if I was a slab of steak. Coincidentally, I had just graduated from the National Dog Training Academy and was able to tame the beast (it took a while though). I decided to keep him, because why not, right?! So that's pretty much it. Me and Bernard -- that's his name-- are living happily ever after in my large mansion because I am very rich and i forgot to say i am Bill Gates. Have a nice day.

  • scharkalvin / about 11 years ago / 4

    The hub in the Cerberus isn't powered. Now for a three port hub, that may not be a big deal, but it will eventaully byte you. (pun intended). You could have added a socket on the hub to allow for plugging in a standard 5v wall wart power supply you know. OK, in version three maybe.

    • I think I foresee the 5th revision of the Cerberus has having a cooking surface, full Linux OS, LCD monitor, flashlight, emergency flare, serrated knife, wifi access port, and bottle opener.

      • The Crazy Maker Guy! / about 7 years ago / 2

        I vote for a S.H.O.V.E.L built in. As well as a L.E.V.O.H.S (Lasso Event Void Hole Saddle)

      • Member #461908 / about 10 years ago / 1

        Don't forget wire strippers.

      • Helicopter / about 11 years ago / 1

        Sell this with it! http://www.amazon.com/OEM-UTStarcom-USB-Adapter-Cable/dp/B002W8EDOM/ref=sr_1_1?ie=UTF8&qid=1401122901&sr=8-1&keywords=usb+y+cable

      • nixpulvis / about 11 years ago / 1

        But is it a Turing Machine?

        • By the time it's running Linux?

          Well, strictly speaking, no, unless we build in an infinitely long tape, but presumably it's Turing complete.

    • Sleepwalker3 / about 11 years ago / 1

      Yes, it should have come with the option for external powering considering it's pushed more towards the charging / powering multiple things.

  • While the original cable was great, I'm glad you modified it, if only to stop the flamewars.

  • Member #494303 / about 9 years ago / 1

    Absolutely love this cable! Only thing I would love to see added is a fourth connector: A USB type-A female connector... an extension basically. That way I don't loose a port on my computer when using the cable :)

  • ThomasW / about 10 years ago / 1

    Now you just need to add USB type-C for the next version.

  • Nz / about 10 years ago / 1

    This is my go to cable. Any chance of a shorter version (1-3 FT)? Easier to carry in the laptop bag.

  • SparkyHF / about 10 years ago / 1

    Someone should make a USB 3.0 version of this.

  • Member #544215 / about 10 years ago / 1

    I use a Dremel to grind down the lock tabs on the micro connector. This will prevent ripping the USB terminal and traces from boards like the Fio and Lilypads. Need to be very gentle with micro.

  • Chiel / about 11 years ago / 1

    I never thought i would get excited about getting a package with a usb-cable in it...yet i did with extreme glee when it arrived!

    This Cable is just perfect for my needs. All 3 commonly used plugs in one long red cable. now i don't have to carry multiple cables or try to find the correct on in the tangled black mess of cables i have sitting on my shelf. plus with the integrated hub i can now run my Arduino Leonardo, XMega breakout and Bus pirate at the same time. Considering how i often have to take my projects with me to college and have to program from my laptop this is a ideal solution.

  • Member #120012 / about 11 years ago / 1

    I bought one of these from Little Bird Electronics, one of your distributors in Australia, and am disappointed. I thought it would be the answer to all the cables I need to plug to phone, to Arduino and to other devices but with my PC and Win 7 all the cable seems to be able to do is supply power to the connected device but no comms. My Samsung Galaxy 2 will only charge from it, my Sony PCM recorder is not recognised, my Verbatim portable hard drive is not recognised but spins, my WD portable hard drive is not recognised. Looks like I bought a piece of wire encased in red plastic!

    So it's a low-five to CTP from me.

    Dave

    • M-Short / about 11 years ago / 1

      Make sure you have the correct one. The original cable was designed to only use one device at a time and didn't work well with some devices. It worked great with Arduinos and such, but not as well with some commercial products, especially high sped devices such as hard drives and Ardroid devices. Originally we figured that would be fine, but realized people were wanting to use it a bit differently. This version has a USB hub in it to make it more versatile and remove those limitations. But both cables have the same name, and our distributors ended up with both. Make sure you have the version you think you have.

  • Wraithan / about 11 years ago / 1

    Instead of having to cut one of these open, you guys mind saying what USB hub chip is in it?

    • bfesser / about 11 years ago * / 2

      I was sent a defective one—bad data on mini-B—which SparkFun promptly replaced. The tech said not to bother returning it, so I cut it open, of course! Not much inside; a Terminus FE1.1s USB 2.0 Hub, a 12MHz crystal, and 10 passives on a small PCB potted in hard plastic.

    • CF / about 11 years ago / 2

      Product ID: 0x0101 Vendor ID: 0x1a40 (TERMINUS TECHNOLOGY INC.) Version: 1.11 Speed: Up to 480 Mb/sec Location ID: 0xfd320000 / 4 Current Available (mA): 500 Current Required (mA): 100

  • Super Special Member #328782 / about 11 years ago * / 1

    Awesome, i always thought my cerb cable was broke, good to know it just wasn't designed for what i was doing. Wil have to make sute this is my next order... Thanks guys for the upgrade/update.

  • tetsujin / about 11 years ago / 1

    I always felt like it was a bit reckless to wire up a USB A male to three B connectors (I mean, I get why you'd do it and how it's useful, but there's always the chance someone will do something dumb like hook up two things at once with it) - so it's nice to see a version that does it "properly", with a hub... But I do expect this one would be a bit problematic for charging, however: since it's a bus-powered hub, the host will shut down any devices which tell the host they need the full 500mA. It'd be fine for devices that just tap power and don't pay attention to the data lines, but anything that does it "properly" and draws only the power the host allows it is probably not gonna charge. Can't win 'em all I guess.

  • Member #260321 / about 11 years ago / 1

    How much current can this supply to each device and total? And if I plug it into a USB 3.0 host, will it provide more juice?

    • I wouldn't count on it. I haven't brushed up on the differences between 2.0 and 3.0 but the USB-A connector looks to be a USB 2.0

      • Sgt_Lemming / about 11 years ago * / 1

        a USB 3.0 host port should still provide more power to a USB 2.0 device, so yes it should work... unless they have restricted the current in the hub chip.

        Edit: To clarify this a bit, the extra pins in USB 3.0 connectors are pretty much all for data, the power pins are all common.

        • tetsujin / about 11 years ago / 1

          Well, we're talking about two different problems here: there's the negotiation between the USB host and device of how much power the device is allowed to take, and then, separately, there's how much power the port will actually supply before you blow a fuse or something. In terms of actual supply, probably drawing 500mA from this thing won't be an issue, even if you're hooking it up to a USB 2.0 port. In terms of negotiation, a USB host would only allow a device attached to a bus-powered hub to claim 500mA if the hub was already itself granted -more- than 500mA. Under USB 2.0, that's just not possible. 500mA is the most any USB device is allowed to draw from the bus, so the total of all devices powered by a bus-powered hub has to be less than 500mA, or the host will shut down one or more of the devices. If this were a USB 3.0 hub, then yes, it could negotiate for more than 500mA from the host and downstream devices could themselves negotiate for 500mA or more. But as far as I know, this is just a run-of-the-mill USB 2.0 hub, so it can't do that. There's a lot of devices made that plug in to USB and draw more current than they actually report to the host (Arduinos, IIRC, request only 100mA - but depending on what kind of hardware you've got powered by the Arduino it could require more power than that) - and some devices just tap the USB power pins and don't communicate with the host at all. Technically, you're not supposed to do this. Power is negotiated with the host in order to protect the host from excess current draw and protect the devices from a brown-out. As a result, some devices (PS3 controllers, for instance) won't charge from USB unless they are enumerated by a USB host which grants them 500mA current draw - and so as a result you can't charge a PS3 controller by connecting it to a bus-powered hub.

          • Sgt_Lemming / about 11 years ago / 1

            Under USB 2.0, that’s just not possible. 500mA is the most any USB device is allowed to draw from the bus, >so the total of all devices powered by a bus-powered hub has to be less than 500mA, or the host will shut >down one or more of the devices.

            That is providing the hub follows the spec to the letter, which a lot of them don't.

Customer Reviews

4.9 out of 5

Based on 16 ratings:

Currently viewing all customer reviews.

1 of 1 found this helpful:

This is an awesome cable.

Considering that this cable costs only a little bit more than a single cable of one type, I figured it was worth a try. The only issue I've had is it will not charge my phone faster than my phone drains power, but as that isn't the intended function of this cable it doesn't affect my review. It works well for my Arduino and AVR ISP programmer.

3 of 3 found this helpful:

I bought this for the mini-b, but use it with the b and micro-b

I've bought this cable to power my bus pirate on the usb mini-b, but use it with my arduino uno on the usb b, and cellphone as a micro-b.

2 of 2 found this helpful:

Works great.. even better when I remembered it was a USB hub!

I originally bought this so that I only needed one cable to switch between Micro-B and Mini-B; having the type B was just a bonus. $7 (at the time of writing) is a small price for three cables in one.

Worked great when I got it: high-quality connectors, high-quality cable, great length, and a color I'll be hard-pressed to not spot in a bin of dongles and wires.

I originally forgot this thing is actually a USB hub and only remembered after looking at the USB device tree on my machine. It's pretty slick to be able to plug in a JTAG host board AND my device under debug with the same USB cable.

I know this is SparkFun-branded, and thus bears the SparkFun signature red, but I'd love to be able to have this thing in green or purple or blue.

5 of 5 found this helpful:

Best thing EVER!

I'll admit: this is one of those things that you don't think you need until you get your hands on one. But once you do, you never go back to individual cables. It is so useful, occasionally I just use it to power stuff because I'm too lazy to get one out of my bin of USB cables. tl;dr buy it! It helps out a lot

2 of 2 found this helpful:

I love this cable!

This cable is awesome! I love using it to power an Arduino type board over Micro-B (such as the Sparkfun ESP8266 Thing) while using the Sparkfun FTDI Basic Breakout over Mini-B to program it and monitor Serial communication. It's also great for powering multiple devices simultaneously, though note you're limited by the supplying USB port.

2 of 2 found this helpful:

Possibly my favorite cable out there

This cable is super useful. The quality is great, and it's very useful to have around. I can simultaneously program an Arduino Uno, a Nano, and an ESP8266 dev board, all from one USB port!

EDIT: I do wish SFE would make a version with USB-C added now that more boards are moving over to USB-C

1 of 5 found this helpful:

I bought this for the mini-b, but use it with the b and micro-b

I've bought this cable to power my bus pirate on the usb mini-b, but use it with my arduino uno on the usb b, and cellphone as a micro-b.

1 of 5 found this helpful:

I bought this for the mini-b, but use it with the b and micro-b

I've bought this cable to power my bus pirate on the usb mini-b, but use it with my arduino uno on the usb b, and cellphone as a micro-b.

Works Great!!!!

Very handy to have in the computer case. It works excellent, and I love the new hub feature. The only improvement would possibly be a USB C connector.

0 of 4 found this helpful:

I bought this for the mini-b, but use it with the b and micro-b

I've bought this cable to power my bus pirate on the usb mini-b, but use it with my arduino uno on the usb b, and cellphone as a micro-b.

0 of 4 found this helpful:

I bought this for the mini-b, but use it with the b and micro-b

I've bought this cable to power my bus pirate on the usb mini-b, but use it with my arduino uno on the usb b, and cellphone as a micro-b.

Very, very, very useful!

This cable is great for toying with multiple Arduinos at once. Well worth $7.

One of the best investments

I used this in the company truck to power personal and company electronics!

For when you have more than one thang, each thang is different, and only one USB port.

My desk is awash by an invasion of orange snakes!

Durable and useful

I have been using one of these for various programming and "oh I need a usb cable" tasks for 7 years and 355 days now and it still works just as well as it did when I bought it. It's super handy when you have various old PCBs, dev boards, and tools around that still use mini and standard USB connectors, and it doesn't even take up much more space than a regular 6 foot cable.

I really like being able to connect one of those cheap logic analyzers to the mini-B and having two connectors left over to power an arduino or something. I also love having this around for the rare occasion I need to connect to a random printer. I highly recommend buying one, especially since it costs less than most 6 foot single connector cables.

0 of 4 found this helpful:

I bought this for the mini-b, but use it with the b and micro-b

I've bought this cable to power my bus pirate on the usb mini-b, but use it with my arduino uno on the usb b, and cellphone as a micro-b.