SparkFun will be closed on Tuesday, November 5th to support our team in being able to go out and vote! Orders placed after 2 pm MT Monday, November 4th will ship on Wednesday, November 6th. Thanks for your patience and understanding.
The Arduino Display Adapter is a simple Arduino Shield designed to provide a convenient interface to attach 4D Systems display modules to the Arduino platform, without having to use jumper wires on the Arduino headers.
Communication to the 4D Systems display modules is performed via the Arduino's serial port (RX and TX), and is provided to the user in a simple 5-pin interface, where a 5 way cable can be attached between the Shield and the display module.
Power for the display is supplied from the Arduino’s 5V bus. No external power is required for the Display Module as all power is supplied from the Arduino, via the display adapter.
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
No reviews yet.
Why is this retired? I need two of these.
http://www.4dsystems.com.au/productpages/4D-Arduino-Adaptor-Shield-II/downloads/4D-Arduino-Adaptor-REV2.xx_datasheet_R_1_2.pdf
Where should I connect the 5 way cable H1 or H2 in the adapter. The Datasheet still shows the old adapter