Qwiic Adapter

There are already many I2C devices in the wild. The Qwiic adapter converts the standard I2C pinout (GND, 3.3V, SDA, and SCL) to the 4-pin 1mm JST connector used in the Qwiic system.

As we develop new I2C products we will be adding the Qwiic connector to them. In the mean time, this adapter allows you to purchase one of these currently supported boards, solder it on, and get it on the Qwiic system quickly (grin). You can also solder the four wires on any 3.3V I2C device to the adapter get it on the Qwiic system.

The Qwiic system enables fast and solderless connection between popular platforms and various sensors and actuators. You can read more about the Qwiic system here.

We carry 200mm, 100mm, 50mm, and breadboard friendly Qwiic cables.

  • 2 connectors: SM04B-SRSS or equivalent
  • Can be used with any 3.3V I2C but you will need to solder wires
  • Can be used to inspect the I2C bus using a logic analyzer

Tags

Qwiic Adapter Product Help and Resources

Qwiic Adapter Hookup Guide

November 30, 2017

Get started with your Qwiic adapter board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C enabled device.

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.