Here is a large cover to protect all of the HATs that you want to go onto the Raspberry Pi that you have attached to your SmartiPi Touch. This easy-to-install back cover screws into the back VESA mounts on the SmartiPi Touch with the four included screws. The cover allows you to protect HAT boards and other electronic components that you might want for your project. Each is made out of ABS plastic and can be easily cut, drilled or otherwise modified for any application or use. Additionally, the cover helps protect the ethernet and USB ports on the Pi B+, 2 and 3.
The large SmartiPi Touch Back Cover is 37mm deep and allows for an additional 114mm of space not reserved for your HATs.
Note: The SmartiPi Touch Back Cover does NOT include a SmartiPi Touch, LCD, camera, Raspberry Pi or any other electronics. This product only contains the cover and mounting screws.
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
No reviews yet.
Does the SmartiPi Touch Back Cover fit the SmartiPi Touch 2?
Hi there, it sounds like you are looking for technical assistance. Please use the link in the banner above, to get started with posting a topic in our forums. Our technical support team will do their best to assist you.
That being said, based on the manufacturer's website it looks like there is a product revision for the Touch 2 back cover.