Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 0
Wish List

SparkFun Raspberry Pi Qwiic Kit

Get started with Qwiic with your Raspberry Pi with this simple kit! The SparkFun Raspberry Pi Qwiic Kit includes a HAT, two Qwiic-enabled breakout boards, and three cables to help make I2C easier for you to set up and use! All you'll need is a Raspberry Pi with a 2x20 GPIO header to plug the HAT into. Make sure to check the Includes tab above to see everything that comes in the box!

The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

FYI: It is important to point out that this kit WAS available for a limited time for our "Four Weeks of Free" event. It was priced accordingly due to the fact that we only had a limited amount of stock available. Unfortunately, the promotion is currently sold out and is no longer available to be added to your cart for free.

Tags

SparkFun Raspberry Pi Qwiic Kit Product Help and Resources

AS726X NIR/VIS Spectral Sensor Hookup Guide

October 19, 2017
It's now easier than ever to measure and characterize how different materials absorb and reflect different wavelengths of light. The AS726X spectral sensors allow you to detect wavelengths in the visible range (VIS) and near infrared range (NIR)!
Favorited Favorite 6

Qwiic HAT for Raspberry Pi Hookup Guide

November 30, 2017
Get started interfacing your Qwiic enabled boards with your Raspberry Pi. This Qwiic connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic connectors.
Favorited Favorite 3

Qwiic Micro OLED Hookup Guide

January 18, 2018
Get started displaying things with the Qwiic Micro OLED.
Favorited Favorite 7

Qwiic pHAT for Raspberry Pi Hookup Guide

May 23, 2019
Get started interfacing your Qwiic enabled boards with your Raspberry Pi. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic connectors.
Favorited Favorite 2

Core Skill: Programming

If a board needs code or communicates somehow, you're going to need to know how to program or interface with it. The programming skill is all about communication and code.

3 Programming

Skill Level: Competent - The toolchain for programming is a bit more complex and will examples may not be explicitly provided for you. You will be required to have a fundamental knowledge of programming and be required to provide your own code. You may need to modify existing libraries or code to work with your specific hardware. Sensor and hardware interfaces will be SPI or I2C.
See all skill levels

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

2 Electrical Prototyping

Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.