- Home
- Product Categories
- Kits
- Old Dominion Custom Kit
Old Dominion Custom Kit
Lab Kits for ODU Course ECE485W
- 4x Diode Rectifier - 1A, 400V (1N4004)
- 2x SparkFun Solder-able Breadboard
- 1x SparkFun 16x2 SerLCD - Black on RGB 3.3V
- 1x Infrared Proximity Sensor Short Range - Sharp
- 2x Parallax Continuous Rotation Servo
- 1x Ultrasonic Distance Sensor
- 1x SparkFun Line Follower Array
- 4x Transistor - NPN, 60V 4A (2N5192G)
- 1x Hobby Gearmotor - 140 RPM (Pair)
- 2x Wheel - 65mm (Pair)
- 1x Resistor Kit - 1/4W (500 total)
- 1x Jumper Wires Premium 6" M/M - 20 AWG (10 Pack)
- 1x Jumper Wires Premium 6" F/F - 20 AWG (10 Pack)
- 2x Rotary Potentiometer - 10k Ohm, Linear
- 1x Digital Multimeter
- 1x Arduino Uno
- 1x Standoffs Plastic - (4-40; 3/4"; 10 pack0
- 1x Standoffs Plastic (4-40; 3/8"; 10 pack)
- 2x JST Jumper 3 Wire
- 8x LED - Basic Red 5mm
- 4x Mini Pushbutton Switch - Tall
- 8x Optical Detector / Phototransistor
- 1x USB Cable A to B - 6 Foot
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
3 out of 5
Based on 1 ratings:
0 of 1 found this helpful:
Main Components are great. Supplemental Components are not enough at all.
Is there are a reason why there only 8 LEDs and only 10 Jumper Wires for M/M and F/F? Not even a soldering iron just in case? All these resistors provided could have been halved in order for us to have more jumper wires. I just wish I had everything I needed for all my Labs when I paid $173.95 for this kit.
We're sorry this isn't a more comprehensive kit, your university decided what components and what quantities of those components to include. You might mention this to your professor, they may be able to change the contents of the kit to better suit your lab needs.