Replacement: None. We are no longer carrying this development board but have a look at the rest of our development tools. This page is for reference only.

Header board for the SAM7 ARM processor.

• MCU: AT91SAM7S64 16/32 bit ARM7TDMI? with 64K Bytes Program Flash, 16K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
• Perfect solution for building custom USB peripherals
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• USB connector
• RESET circuit
• RESET button
• Status LED
• TST jumper, for SAM-BA downloading
• On board voltage regulator 3.3V with up to 800mA current
• Single power supply: through USB or from extension header pin
• Power supply LED
• Power supply filtering capacitor
• 18.432 MHz crystal on socket
• Extension headers for all uC ports + RST and power supply
• PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
• Distance between the headers: 25.4 mm (1")

Software:

• Blinking LED project and Binary code for SAM-BA load
• Sample mouse driver with AT91SAM7P64 project
• UART routines project
• SD/MMC read/write routines project
• button read, temperature measurement project

• 2x1.3" (50x34 mm)

• SAM7-H64 extension headers pin assignments
• SAM7-H64.pdf
• SAM7-H64 dimensions
• SAM7-H64 Schematic
• How to program SAM7-H64
• Getting Started with the SAM7 boards
• Using Open Source Tools - Guide by Jim Lynch