I-make-robots

Product SEN-12829 about 7 years ago

Hi! Is there a way to change the I2C address? I'd like to use 6+ color sensors in my project.

Product ROB-10398 about 7 years ago

Pump works great off an Arduino with an AMS1 shield in my project (https://hackaday.io/project/9055-jigsolve). When I turn it off or run it in reverse suction is not released. I've been told I might need a solenoid release vale added to the hose line. What solenoid do you recommend? Preferably something with 1/4" barbs like the pump to make integration easy.

Product SEN-10121 about 12 years ago

I followed the basic bildr tutorial. My board appears to hang when it calls the sensor library's init() method. Anyone know what that's about? Thank you!

Product ROB-10848 about 13 years ago

You could also get a linear actuator from Firgelli in Victoria BC or Firgelli Auto in WA or UltraMotion (if you have more money than god)

Product ROB-10543 about 13 years ago

I'm sorry, but that's wrong. The math is a little different but you can still move any direction you like.

Product DEV-09971 about 14 years ago

8 per line. I use 3 per line to run my hexapod.
http://www.youtube.com/watch?v=J3ySNng9vsg

Product DEV-09970 about 14 years ago

Using a DisplayDuino and a ServoBoard (the three pin headers you're looking for) I built a hexapod walking robot and a Delta robot.
http://www.youtube.com/watch?v=J3ySNng9vsg
http://www.youtube.com/watch?v=pCag65sA9IQ

News - New Products Extravaganza… about 14 years ago

Using a DisplayDuino and a ServoBoard I built a hexapod walking robot and (later) a Delta robot.
http://www.youtube.com/watch?v=J3ySNng9vsg
http://www.youtube.com/watch?v=pCag65sA9IQ

Product ROB-09402 about 14 years ago

Here's a helpful tutorial I wrote for you CNC fans.
3 EasyDrivers, 3 NEMA 17s, and a Duemilanova are all you need to do the basic wiring for a CNC machine.
http://www.instructables.com/id/How-to-wire-an-arduino-based-3-axis-CNC-machine/