Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
A flexible, paper-thin GNSS Antenna with a U.FL connector and an adhesive backing.
The SparkFun WiFi IR Blaster is designed to connect all of those old, legacy IR-controlled devices to a WiFi network exposing…
A small 1/4 wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and…
The SparkFun OpenLog Artemis (w/o IMU) Kit is intended to provide everything you need to log the data of your choice with the…
This is a basic RP-SMA male to female connector cable at 25cm in length and RG174 housing.
RFM97CW Sub-GHz radio transceivers are ideal for long range wireless applications.
The Digi XBeeĀ® RR Pro Module is an embedded solution providing fast point-to-multipoint or peer-to-peer networking via an SM…
The Digi XBeeĀ® RR Pro Module is an embedded solution providing fast point-to-multipoint or peer-to-peer networking via an U.…
2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm imp…
The RTK Facet Carrying Case helps protect your valuable high-precision GNSS receiver from the harsh elements of the field.
The SparkFun Blues Wireless MicroMod Starter Kit provides every part needed to get you connected and start prototyping with t…
ESP32-C6 is Espressifās first Wi-Fi 6 SoC integrating 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE) and the 802.15.4 protocol.
The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development.
This GNSS Antenna mounting hardware kit gives you what you need to mount your antenna to a structure or support.
Molex LTE/5G Cellular External Antennas are designed for 2G/3G/4G/5G modules and devices.
The Hologram eUICC SIM Card is a mix between legacy and new technology for cellular service for your project.
This is a similar XBee Pro module with a u.Fl connector. You also get a built in microcontroller so it can be programmed usin…
This small form-factor antenna offers a 2.4GHz frequency range.
Replacement part for the open source high precision GNSS RTK Facet L-Band receiver.
The ESP32-C3 Mini Development Board is an entry-level development board based on ESP32-C3-MINI-1, a module named for its smal…
This is an XBee module with a U.FL connector. You also get a built in microcontroller so it can be programmed using MicroPyth…
These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcon…
Do you need power? This breakout for the 868M30S module from EBYTE is a 1W (30dBm) LoRa transceiver. LoRa is great for long r…
This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. **Note:** This breakout boar…
The SparkFun Thing Plus - NINA-B306 offers a unique combination development platform in the Thing Plus form factor featuring …
This board brings all the power of the well-known ESP32-S3 with the full support of the Arduino ecosystem.
Replacement part for the open source high precision GNSS RTK Facet receiver.
This is a basic RP-SMA male to female connector cable at 10M in length and RG58 housing.
The SparkFun NEO-M9N MicroMod GNSS Function Board is a high quality 92-channel u-blox M9 engine, geospatial board with ~1.5 m…
This is a very simple 1m long Male RP-TNC to Male RP-SMA cable. We like to use this cable to connect our ultra high-frequency…
Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not…
A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside…
When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view …
The SparkFun MicroMod DA16200 Function Board adds a fully integrated WiFi module to any MicroMod project.
Operating on the 2.4GHz or 5.8GHz band, it works great for WiFi, Bluetooth or ZigBee.
This easy-to-install durable, polymer antenna operates on greater than 45% efficiency on LTE bands from 698MHz to 3000MHz.
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connecti…
This connector cable interfaces N type female to RP-SMA male. Primarily used to connect our larger 915MHz LoRa antenna to RP-…
SparkFun has teamed up with ARM and Dialog to provide you with this WiFi Shield based around the DA16200 module.
A U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable.
This is a basic RP-SMA male to female connector cable at 1M in length and RG174 housing.
Commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna.
The ESP32-C6 has integrated 2.4 GHz Wi-Fi 6 (802.11ax) radio, and also supports the 802.11b/g/n standard for backward compati…
The Artemis Development Kit based on the SparkFun Artemis Module and highlights software development features like ArmĀ® Mbed…
The BeagleBone Blue is the affordable and complete robotics controller built around the popular BeagleBone open hardware comp…
The WiFi Shield gives your OpenMV Cam the ability to connect to the Internet wirelessly and is perfect for streaming video fr…