Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or…
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! …
It's your basic red action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the thr…
This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in tha…
This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up gre…
This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up whi…
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect fo…
This is the breakout board for the [thumb joystick](http://www.sparkfun.com/commerce/product_info.php?products_id=9032). Pins…
Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocke…
This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, pa…
It's the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated p…
Although small in size, this roller microswitch is rated for controlling electrical loads ranging from logic level to power d…
This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up blu…
A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep…
This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at [monome.org](http://monome.…
This Translucent Black Cherry MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but…
This plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a shaft. These are clear so t…
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for …
Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to t…
Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm …
This is a translucent silicon rubber button pad with 16 buttons, the same found in our Simon Soldering Kits.
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
This a simple breakout PCB for our [2x2 silicone button pads](https://www.sparkfun.com/products/7836). Each LED and button is…
This is a joystick thumb pad very similar to the thumb pads on PlayStation controllers.
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5…
This a simple breakout PCB for our [4x4 silicone button pads](https://www.sparkfun.com/products/7835). Each LED and button ca…
This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. **Note:** Po…
DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as gener…
These are the sturdy little stomp switches that you find on guitar effects pedals. They’re 3PDT (three-pole, double-throw) …
This is an SMD 6mm square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ r…
This is a simple knob that connects to the small and medium sized linear slide potentiometers.
Surface mount DPDT switch for those tight portable designs. Capable of switching up to 1.2VA (360mA at 3.3V and 240mA at 5V).
A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount, but easily sold…
This is an SMD 12mm square SPST button. What we really like is the large button head and good tactile feel (it ‘clicks’ r…
This is a simple knob that connects to the extra large sized linear slide potentiometer.
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these b…
This right-angle tactile switch has a great 'click' to it. Also, because it's a through-hole design it's very sturdy. Mount i…
This is a 3-terminal microswitch, with a small push-button. This switch has a great 'clicky' sound to it, and a nice tactile …
The Double Backlit user interface is like the Single Backlit Button, but twice the fun!
This is a mountable SPDT slide switch --- great for use as a general control switch. The pins are spaced by 3.7mm (0.14"), ma…
