Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The SparkFun LTE CAT M1/NB-IoT Shield with Hologram SIM Card equips your Arduino-based device with access to data networks ac…
The SparkFun Raspberry Pi Zero 2 W Basic Kit provides you with everything you need to get started with this successive Pi, al…
Say hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32 Pico Mini f…
The Raspberry Pi 4 Desktop Kit (8GB) includes everything you need to turn any monitor with an HDMI port into a desktop PC.
A small 1/4 wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and…
The RedBoard Artemis ATP has 48 GPIO and this board breaks out all of them in an Arduino Mega format.
This easy-to-install durable, polymer antenna operates on greater than 45% efficiency on LTE bands from 698MHz to 3000MHz.
The Digi XBee® RR Module is an embedded solution providing fast point-to-multipoint or peer-to-peer networking via an U.FL a…
This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as w…
The M1600HCT-P-SMA is an unique antenna combining the ability to communicate with the Iridium network while simultaneously re…
The SparkFun ESP8266 Thing Dev Board with Headers is a dev board that has been designed around the ESP8266, with an integrate…
The SparkFun Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Pi 4 in a…
SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and t…
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance…
This small form-factor antenna offers a 2.4GHz frequency range.
This is the 434MHz base RFM69HCW Wireless Transceiver that is found on our RFM69 Breakout. The RFM69HCW is an inexpensive and…
Featuring the Artemis Module, this processor is capable of machine learning, Bluetooth, I2C, GPIO, PWM, SPI & packaged to fit…
This powerful low-profile antenna has a peak gain of ~5.1 dBi and ~82.3% of efficiency.
A flexible, paper-thin GNSS Antenna with a U.FL connector and an adhesive backing.
The Raspberry Pi 4 Basic Kit includes everything you'll need to get up and running with the Raspberry Pi 4 but without the bo…
Replacement part for the open source high precision GNSS RTK Facet receiver.
The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development.
900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance…
Replacement enclosure for the open source high precision GNSS RTK Facet L-Band receiver.
This is a basic RP-SMA male to female connector cable at 25cm in length and RG174 housing.
The SparkFun Notecarrier Cellular Function Board adds a cellular modem to the MicroMod ecosystem using the Notecard - NOTE-NB…
The Digi XBee® RR Module is an embedded solution providing fast point-to-multipoint or peer-to-peer networking via an SMA an…
This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. **Note:** This breakout boar…
Raytac’s MDBT50Q is a BT 5.4 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52840 SoC solution.
This GNSS Antenna mounting hardware kit gives you what you need to mount your antenna to a structure or support.
This board brings all the power of the well-known ESP32-S3 with the full support of the Arduino ecosystem.
The Hologram eUICC SIM Card is a mix between legacy and new technology for cellular service for your project.
The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and s…
The SparkFun WiFi IR Blaster is designed to connect all of those old, legacy IR-controlled devices to a WiFi network exposing…
A 915MHz SMA Duck Antenna for use with the AHPI7292S WiFi HaLow HAT.
This is a fantastic find for SFE. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Specificat…
This is a basic RP-SMA male to female connector cable at 1M in length and RG174 housing.
The SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth transceiver…
The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W.
2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedan…
This ANT700 is a telescopic antenna designed for operation from 300 MHz to 1.1 GHz with a total length that is configurable f…
Replacement enclosure for the open source high precision GNSS RTK Facet receiver.
Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes …
The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data…
Commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna.
The SparkFun ESP8266 Thing Dev Board is a development board that has been solely designed around the ESP8266, with an integra…
Do you need power? This breakout for the 868M30S module from EBYTE is a 1W (30dBm) LoRa transceiver. LoRa is great for long r…
