Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
DataLogger IoT
with onboard 9DoF
This ESP32-based data logger automatically record inputs from a large selection of Qwiic sensors without writing a single line of code.
Jump to Subcategory:
added to your cart!
This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pi…
Bosch BME688 Development Kit is a platform for testing and developing use cases based on temperature, barometric pressure, hu…
These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision …
The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1015 Air Velocity S…
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air.
The KR Sense 45A is a small voltage and current sense breakout board.
Great for detecting motion in a small area and optimized for small movements to offer motion-sensing options for battery powe…
The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Clic…
The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis.
The US1881 is an integrated Hall-Effect latched sensor.
The MicroMod Environmental Function Board includes three sensors to monitor air quality, humidity / temperature, & CO2 concen…
Small electret microphone. Useful in acoustic and audio applications.
The MicroMod Machine Learning Carrier combines the freedom to explore any processor in the MicroMod lineup without the need f…
This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identif…
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use p…
10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NT…
The Walabot Starter is a small, programmable sensor tool that looks into objects using radio frequency technology sense the e…
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low cond…
Embark on a Journey of RFID Exploration with the SparkFun DataLogger IoT RFID Kit.
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
RCWL-0516 is a technology that uses radar Doppler, microwave induction special module for detecting moving objects.
The Build HAT allows you to control LEGO® Technic™ devices with your favorite Raspberry Pi.
Powered by Raspberry Pi's RP2040 microcontroller, this board has the power to run all Tensorflow Lite Micro tiny machine lear…
The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over…
The STMicroelectronics ST25DV _**dynamic**_ Near Frequency Communication / Radio Frequency Identification tag ICs are awesome…
A line follower sensor gives your robot the ability to detect lines or nearby objects.
Thanks to the SparkFun gator:soil micro:bit Accessory Board, you can now measure the moisture level in soil without any vocal…
This is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board …
The Leopard Imaging Camera is a 136° FOV camera module designed for use with the NVIDIA Jetson Nano Developer Kit.
This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now inst…
The KR Sense 90A is a small voltage and current sense breakout board.
Deploy computer vision at the edge faster than ever, with our ready-to-use, standalone intelligent camera.
Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor.
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi …
Sharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a pho…
This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12.
The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer i…
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring …
The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions.
This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal.…
The 6-Channel Temperature Monitor can measure temperatures from as low as −240°C up to +850°C (real-world limits greatly …
The SparkFun RP2040 mikroBUS™ Starter Kit is designed to give you just what you need to start using the Click, Qwiic, and R…
An ambient light sensor with peak sensitivity at 570 nm.
This is the 8mm M-12 mount standard lens for use with the Raspberry Pi HQ Camera Module M-12.