Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is the Add-On kit for the SparkFun Digital Sandbox (DS) learning platform. With this add-on you will be able to perform …
The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development.
The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That's right, n…
This module allows a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form f…
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W…
The NVIDIA® Jetson Nano™ 2GB Developer Kit delivers the performance to run modern AI workloads at a small form factor, low…
The Raspberry Pi 4 Desktop Kit (8GB) includes everything you need to turn any monitor with an HDMI port into a desktop PC.
The Raspberry Pi 4 Basic Kit includes everything you'll need to get up and running with the Raspberry Pi 4 4GB.
ESP-Prog is one of Espressif’s development and debugging tools.
The SparkFun ATECC508A Crypto Co-processor Breakout allows you to add strong authentication security to your IoT node, edge d…
The SparkFun XBee Shield mates directly with any dev board that has an Arduino standard footprint and equips it with wireless…
ESP-Module-Prog-1 is an Espressif flashing mainboard designed specifically for Espressif modules.
An M.2 HAT+ for the Raspberry Pi 5. Allows you to interface with devices such as M.2 SSDs.
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and ea…
The SparkFun gamer:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you…
The Arduino Nano Every is a small, robust and powerful board with the same classic Nano footprint.
The ease of use of a Nano board with the addition of secure IoT and BT connectivity.
The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then …
The SparkFun AST-CAN485 Dev Board is a mini Arduino possessing on-board CAN (Control Area Network) and RS485 ports enabling q…
If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a form…
The Otto DIY Builder is the perfect STEM+A robot kit for parenting or school education and includes everything you need to ru…
The PiJuice is a fully uninterruptible power supply HAT that will always keep your Raspberry Pi powered.
The SparkFun Inventor's Kit Bridge Pack for micro:bit was designed to provide you with an easy way to transform your m:b into…
This 2x20 "tall" header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to…
A kit with the Raspberry Pi 5 - 4GB and an active cooler and case. Fundamental new parts around the Raspberry Pi 5.
The name says it all on this one. An ATmega328P in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. …
The micro:bit Edge Connector - PTH, Right Angle (80-pin) allows you to expand the capabilities of the BBC micro:bit.
The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis.
The Alchitry Io Element Board is the perfect way to get your feet wet with digital design.
The SparkFun Arduino UNO R4 WiFi Qwiic Kit has everything you need to start using the UNO R4 WiFi and Qwiic ecosystem togethe…
This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces. Cable is a…
The SparkFun Qwiic OpenLog can store, or "log", huge amounts of serial data and act as a black box of sorts all over I2C.
This is a USB Type-C Power Supply that is compatible with the Raspberry Pi 4.
DB9 female header - right angle PCB mount. 0.318" Style.
This is SparkFun Beefy 3 FTDI Basic Breakout for the FTDI FT231X USB to serial IC. The pinout of this board matches the FTDI …
The MicroMod STM32WB5MMG Processor has a powerful combination of computing and wireless capabilities all on one Processor.
The is the official USB Type-C Power Supply for the Raspberry Pi Model 4 B.
The OpenMV Cam is a small, low power, microcontroller board which allows you to easily implement applications using machine v…
This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cabl…
The SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth transceiver…
The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from [LilyPad](http://www…
The Auto pHAT is an all in one package that focuses on quickly adding robot functionality and advanced support to your Raspbe…
SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader.
Add data, input, & visibility to your project with a 2.4" TFT display, 6 addressable LEDs, onboard voltage regulator, 6 pin I…
The IOIO-OTG is a PIC development board specially designed to add advanced hardware I/O capabilities to your Android or PC ap…
Atmel's itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz wit…
With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet!
Pi Zero Micro-B to USB A is a really useful USB specification! It allows some small devices that would normally be unable to …
