Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
This robotic claw is a step up from the classic. The MKII takes everything you loved about the standard robot claw from DAGU …
The HUB-ee is a type of robot servo but designed for wheels, in fact it is a wheel, but it is also a motor, a sensor and a mo…
These threaded aluminum channel standoffs are 1” long and have a thread pitch of 6-32, an outer diameter of 8mm, and a 0.4"…
These 9" long stainless steel shafts have a diameter of 1/2". These shafts are solid, which makes them an ideal choice for ax…
These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shaf…
Channel sliders let you achieve precise linear motion with [Actobotics](https://www.sparkfun.com/pages/Actobotics) channels. …
This AMP Micro-MaTch connector crimps onto a ribbon cable so that you can make your own HUB-ee connector cables for HUB-ee wh…
These side mount brackets can function as mounts for encaps for [Actobotics](https://www.sparkfun.com/pages/Actobotics) chann…
This motor mount connects to other [Actobotics](https://www.sparkfun.com/pages/Actobotics) products with a swivel mount, allo…
These 1.25" long stainless steel D-Shafts have a diameter of 1/4". The flat edge that runs the length of the shaft makes it a…
These aluminum channels are the building blocks to the [Actobotics](https://www.sparkfun.com/pages/Actobotics) line and funct…
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. **Note:**…
These single channel 45 degree angle brackets mate directly to [Actobotics](https://www.sparkfun.com/pages/Actobotics) channe…
Another great linear actuator from Miga Motors. The NanoMuscle NM706-Super is a very small electric actuator that utilizes [S…
This is a 4-Pin JST Expansion Socket that can be used in conjunction with the MiP Robotic Platform. Inside each MiP is a smal…
These 12" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for a…
These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 3/8” bore for shafts. The…
These threaded aluminum standoffs are 1.25” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. These s…
These blue “skate” wheels have an outer diameter of 4.90”, an inner diameter of 0.87”, and a width of 0.94”. When u…
**Replacement:** None. We are no longer carrying this gearmotor bracket in our catalog. This page is for reference only. Thi…
These 2.75" long stainless steel D-Shafts have a diameter of 1/4". The flat edge that runs the length of the shaft makes it a…
Nanomuscle is a shape memory alloy based rotary actuator. Rotation up to 60 degrees in either direction. Built-in digital con…
These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your 3F Futaba servo spline. These alum…
The B Style Motor mount connects to the outside of [Actobotics](https://www.sparkfun.com/pages/Actobotics) channels and works…
These clear pink precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub patter…
STSPIN233 Click is a complete solution for a 3-phase integrated motor driver, based on the STSPIN233, Low voltage 3-phase int…
These flat aluminum clamping hubs are perfect for heavy duty applications that need shafting or tubing 1" in diameter secured…
Sometimes you need to fasten something down with a nut, but don't want to worry about shorting anything. A nylon nut can save…
These skate wheel adapters have a diameter of 1”, a width of 0.32”, and utilize the 0.77” hub pattern. These adapters a…
These 4" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for ax…
These 5" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for ax…
These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears h…
These 1" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for a…
These lipped Rubber Rings have an inner diameter of 2.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be …
These precision gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anyth…
These 360° rotation 2:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size se…
These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an ou…
These threaded aluminum standoffs are 1-1/2” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Not…
These 1/2" bore hub spacers allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. These hub…
These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their e…
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or …
These 1.375" long stainless steel D-Shafts have a diameter of 1/4". The flat edge that runs the length of the shaft makes it …
These 5" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for ax…
These white precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. Th…
These zinc-plated socket head machine screws are 1/4” long and have a thread pitch of 6-32. Sold in packs of 25. **Note:…
**Replacement:** None. We are no longer carrying this MicroRax kit in our catalog. This page is for reference only. If you'r…
These zinc-plated socket head machine screws are 1/2” long and have a tread pitch of 6-32. Sold in packs of 25. **Note:** …
