Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
This 100 Ohm trimmable potentiometer has a small knob built right in and it's breadboard friendly to boot!
This 100K trimmable potentiometer has a small knob built right in and it's breadboard friendly to boot!
This 2K trimmable potentiometer has a small knob built right in and it's breadboard friendly to boot!
The RELAYplate from Pi-Plates is the first dedicated relay board for the Raspberry Pi designed to meet the safety requirement…
The Mi-Light LED Controller Box is a 2.4GHz RF LED accessory that enables your non-addressable LED strips to change color, di…
This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF los…
The BNC probe kit includes a 20MHz professional probe with hook and tip as well as a couple converters to connect the probe t…
This is a 25 foot long DMX cable capable of better communications for lighting and special effects through standard or digita…
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects!
We've taken the classic, portable, rechargeable lithium ion battery pack and tweaked the design to make it amenable to low cu…
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! E…
10-pack of wires that are pre-terminated with an alligator clip on one end and a female FDD 5.5-250 spade connector on the ot…
RoundyPi is a compact 1.28” Round LCD Display Based on RP2040 Microcontroller 240×240 Resolution Display with GC9A01 Drive…
This 5A power supply outputs both 24VDC and is terminated with a center-positive 5.5 x 2.1mm barrel connector.
Our friends over at LinkSprite have made this nifty little RS485 Shield V3 for the Raspberry Pi, now you will be able to have…
The LM311 is designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplif…
We all know that you can never get too many LEDs. Don't worry, we've got you covered. This is a mixed pack of 26 LEDs all con…
This is a 1.5' long USB extension cable equipped with type A male connector on one end to plug into your computer and a type …
MIKROE Voltmeter Click is a mikroBUS™ add-on board for measuring voltage in an external electric circuit.
The BD10KA5W is a low-saturation regulator with an output voltage precision of ±1%. It also has built-in overcurrent protect…
These are your standard 1.5V AAA alkaline batteries from Rayovac. Don't even think about trying to recharge these. Roughly 75…
These are 1/4th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 1K Ohm resistors ma…
These are 1/4th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 100 Ohm resistors m…
Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? Check out this high qualit…
This Relay Shield v2.0 from Evil Mad Scientist is a simple Arduino add-on that gives your Arduino the ability to control a si…
This is a class 10 16GB microSD memory card, perfect for housing operating systems for single board computers and a multitude…
USB is being implemented as a power connection standard more and more these days. But you don’t always have a computer on h…
These are 101mm long 20AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board…
These are sealed, addressable 1-meter-long 5V white tri-color LED strips that come packed with 60 SK6812 5050 LEDs. Each of t…
This is an class 10 16GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi. This SD …
M6E-Nano’s wide RF output range (0 dBm to +27 dBm) is important for the read/write requirements for RFID-enabled printers a…
This isn't your typical LED bar graph; this is a behemoth! This RGB bar graph features an impressive 48 segments of high-brig…
The Pimoroni Unicorn HAT is a "shield" for the Raspberry Pi that sports a matrix of 64 (8x8) addressable RGB LEDs that are po…
The Pimoroni Blinkt! is a "shield" for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make …
The Pimoroni Display-O-Tron HAT is a "shield" for the Raspberry Pi that provides you with a 16x3 character LCD, as well as a …
The LIDAR-Lite Accessory Cable is terminated with a simple 6-pin JST at one end and a bare wire pigtail at the other. The sam…
The gator:color ProtoSnap is perfect if you want to add a low-profile glowing component to your project.
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 …
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 …
Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third gen…
These Adam Tech Wall Adapter Cables are terminated with a standard North American (NEMA 5--15P) plug at one end and three ins…
This is a 100W single output switching power supply from Mean Well. This power supply is extremely reliable and able to outpu…