Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
CUI Inc SWI10 Wall Plug Adapters provide up to 12W continuous power.
The MI:power board adds portability to your project. A buzzer and 3V coin cell holder is connected to the 3V, GND and P0 conn…
SmartLED Shield enables the Teensy 4 to drive high-quality graphics to HUB75 RGB LED panels, with 36-bit color and 240 Hz ref…
The Loomia Single Backlit Button is a simple mechanical switch that comes with an LED inside.
MIKROE Binho Nova Click is an adapter Click board™ that can be used as a multi-protocol adapter.
MIKROE 4x4 Key Click carries a 16 button keypad.
MIKROE ETH 3 Click is a compact add-on board that contains Ethernet Controller & PHY for embedded applications.
It features a single-channel digital potentiometer MCP4161 with 8-bit resolution (256 wiper steps) and industry-standard SPI …
MIKROE EEPROM Click is an accessory board in mikroBUS™ form factor.
MIKROE Flash Click is 8,388,608 bits (8 Mbit) on a Click board™, organized into 1,048,576 bytes (1 MB).
MIKROE FRAM Click is a Click board™ that carries a ferroelectric RAM module.
It features a microSD card slot for microSD cards used as a mass storage media for portable devices.
MIKROE MRAM Click features MRAM module which contains 262,144 magnetoresistive memory cells, organized into 32,768 bytes of m…
MIKROE MRAM 2 Click is a compact add-on board for applications that must store and retrieve data and programs quickly using a…
MIKROE SRAM Click lets you add 1 Mbit of additional SRAM memory to your devices, via the 23LC1024 chip.
MIKROE nvSRAM Click is a compact add-on board that contains the most reliable nonvolatile memory.
MIKROE Clock Gen Click offers an ideal replacement for crystals, crystal oscillators, VCXOs, phase-locked loops, and fanout b…
MIKROE Solar energy Click recharges the connected LiPo battery or the onboard 220mF supercapacitor, using the photovoltaic el…
MIKROE BATT-MON Click is a very versatile, high accuracy, multiple-chemistry battery gauge for applications single-cell batte…
MIKROE MIC24045 Click carries MIC24045 I2C-programmable, high-efficiency, wide input range, 5A synchronous step-down regulato…
MIKROE BUCK Click is a buck switching regulator that accepts a wide input voltage range of up to 40V and steps it down to 3.3…
MIKROE BATT-MAN Click is a very versatile battery operated power manager.
MIKROE RGB Driver Click is an RGB LED driver, capable of driving RGB LED stripes, LED fixtures and other RGB LED applications…
MIKROE Charger 16 Click is a compact add-on board that represents a single-cell battery charger.
MIKROE 8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs.
Balancer 5 Click is an intelligent 2-cell Li-Ion battery charger, system power manager, and a battery fuel gauge Click boardâ…
The Buck 14 Click is a Click board™ based around the BMR4613001/001, a PoL regulator from Flex.
The E-Paper 1.54" display is based on Active Matrix Electrophoretic Display (AMEPD) technology and has an integrated pixel dr…
The step down DC-DC regulator used on this Click board™ is the MPM3632C, a 18V 3A ultra-low profile DC-to-DC power module b…
BarGraph 3 Click is equipped with a five-segment LED bar graph display, notable for its strong and uniform illumination of th…
RoundyFi is a compact 1.28” Round LCD Display Based on ESP-12E WiFi Transceiver Module 240Ă—240 Resolution Display with GC9…
**Replacement:** None. We are no longer carrying these relays. This page is for reference only. These are high quality Singl…
**Replacement:** None. We are no longer carrying this device. This page is for reference only. The nRF24AP1 is an ultra-low …
**Replacement:** None. We do not have a direct replacement, but are looking for one. This page is for reference only. This i…
**Replacement:** None. We don't carry a direct replacement for this sensor but have a look at the rest of our [accelerometers…
**Replacement: **[COM-09633](http://www.sparkfun.com/products/9633). We are discontinuing this line of Luxeon LEDs. We will n…
**Replacement:** None. These toggle switches were sent to us by mistake and we are no longer carrying them in our catalog. Th…
Put the pedal to the metal with this metal foot switch. This is the same kind of foot pedal you might find switching the powe…
The LED Effects Add-On Pack provides you with four unique stickers to make your LEDs blink, twinkle, and generally effect the…
MIKROE 8x8 R Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
MIKROE Thumbstick Click is a high precision input device.
MIKROE Boost Click carries Microchip’s MIC2606, a 2MHz, PWM DC/DC boost switching regulator available in a 2mm x 2mm MLF® …
MIKROE Dot Matrix R Click is a display device Click board™ based on a four-digit dot matrix display module.
This is an isolated DC-DC converter that accepts 36-72VDC and outputs 5VDC and 20A.
This is a 300mm long Male TNC to Male SMA cable. This is an excellent cable for connecting one of our RTK development boards …
MIKROE Qi RX Click is a compact add-on board made for the purpose of wireless power transfer.
This is a 26 AWG simple two wire automotive cable. Each assembly has bare wires on both ends with a Molex A and B connector i…
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance a…
