Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
15V 36W USB-C PD Power Supply for pi-top [4].
Relay Click 3 is a dual relay Click board, featuring two single-pole double-throw relays which can be operated by output pins…
The uOLED-96-G2(GFX) is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PM…
The FRAM 3 Click is a Click board™ that carries a ferroelectric RAM module.
This is a very small, extremely lightweight battery based on Polymer Lithium Ion chemistry. This is the highest energy densit…
These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean lo…
A U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable.
MIKROE H-Bridge Driver Click is a compact add-on board that contains an H-bridge gate driver, also known as a full-bridge pre…
This bundle comes with the eINK Click adapter and e-Paper display 2.13”.
Button G Click is the simplest solution for adding a single pushbutton to your design.
These are bare addressable 1 meter long 5V RGB LED strips that come packed with 60 APA104s per meter.
**Replacement:** None. We are no longer selling these. This page is for reference only. These are very small surface mount q…
This bundle comes with the eINK Click adapter and e-Paper display 1.54”.
Charger 12 Click is a single lithium-ion (Li+) cell or three-cell NiMH/NiCd battery charger.
The Loomia Single Backlit Button is a simple mechanical switch that comes with an LED inside.
The ATX power connector breaks out the standard 4-pin computer peripheral port for you 12V & 5V devices from one wall adapter…
PAC1934 Click carries the PAC1934 four channel DC power/energy monitor from Microchip.
The SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position.
The Soft Power Switch is a passive, hard on/off switch with software feedback and control. In other words, it's like the on/o…
MIKROE DALI Click is a compact board that provides Digital Addressable Lighting Interface (DALI) to your design.
Charger 13 Click is a single lithium-ion (Li+) cell battery charger.
I2C MUX Click is packed with the TCA9546A, a quad bidirectional translating switch controlled via the I2C bus.
POT 2 Click is a Click board™ with the accurate selectable reference voltage output.
Flash 8 Click is a compact add-on board representing a highly reliable memory solution.
BIG 7-SEG R Click is what you need if you want to add a seven-segment LED display to your project.
LLC I2C Click can be utilized as the level converter for logic signals, which makes it a very useful Click board™.
The SparkFun EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to…
Flash 4 Click is a perfect solution for the mass storage option in various embedded applications.
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
The DAQCplate (Data Acquisition and Controller) from Pi-Plates adds a rich set of input/output options to your Raspberry Pi. …
This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface ([datasheet…
Boost-INV 2 Click features a set of integrated circuits which are used to achieve digitally controlled output voltage.
Signal Relay Click can be used for ON/OFF control in various devices.
UT-L 7-SEG R Click carries two SMD ultra thin LED 7-SEG displays and the MAX6969 constant-current LED driver from Analog Devi…
The Pimoroni Blinkt! is a "shield" for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make …
FRAM 5 Click is a compact add-on board representing a highly reliable ferroelectric random access memory solution.
The three inch version of the SparkFun LuMini LED Ring, packed with 60 individually addressable LEDS, each capable of produci…
Charger 5 Click is designed to charge Lithium-Ion and Lithium-Polymer batteries.
BATT-MON 4 Click is a compact add-on board representing an advanced battery monitoring solution.
CUI Inc SWI10 Wall Plug Adapters provide up to 12W continuous power.
This is the 16 LED NeoPixel Ring from Adafruit, a small chainable 1.75" (44.5mm) outer diameter board equipped with 5050 WS28…
PowerBank Click is a USB charging expansion board which can be used for creating power bank devices or adding charging option…
16x9 Click is an array of 144 LEDs, driven by a single IC with relatively low pin count (28).
Tamper 2 Click contains a levered D2HW-A221D switch by Omron, which outputs signal in both positions - pressed and released.
RTC 16 Click is a compact add-on board that accurately keeps the time of a day.
Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? Check out this high qualit…
DIGI POT 2 Click is a mikroBUS™ add-on board with a single channel digital potentiometer TPL0501 with 256 wiper positions.
![pi-top [4] Power Supply](https://cdn.sparkfun.com/r/140-140/assets/parts/1/7/9/3/5/18490_-_pi-top__4__Power_Supply.jpg)
