Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
This 0.005" Flexinol® Actuator Wires (aka shape memory [Nitinol](http://en.wikipedia.org/wiki/Nickel_titanium)) is a one foo…
This is a 1m long USB 2.0 Type C to Type C cable with a 100W current rating.
This is a 10 foot long DMX cable capable of better communications for lighting and special effects through standard or digita…
These Wall Adapter Cables from iPixel are terminated with a standard NA plug at one end and two insulated spade terminal conn…
This simple adapter wire terminates on one end with a JST-PH Female connector, and a JST-SM Male connector on the other.
This is a 5 wire cable with a SHR style (1mm pitch) connector on one end and 5 breadboard friendly pins on the other. These a…
This is a 5 wire cable with a SHR style (1mm pitch) connector on each end. These are very similar to our Qwiic connectors and…
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors o…
This simple adapter wire terminates on one end with a JST-PH Female connector, and a JST-SM Female connector on the other.
This simple adapter wire terminates on one end with a JST-PH Male connector, and a JST-SM Male connector on the other.
This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF los…
This is a 25 foot long DMX cable capable of better communications for lighting and special effects through standard or digita…
This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals …
This is a 3ft VGA Male to USB-C cable.
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the work…
This is the 36mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards. *** _**smôl** is an ec…
Is your laptop covered in stickers that hide the dents? Do you put your equipment through its paces? The SparkFun 1 meter Rug…
It can be difficult to get a wall-wart where you need it. The promise of PoE (power over ethernet) is great, but what if your…
This is an inexpensive HDMI cable that you can use to hook up your Raspberry Pi to a suitable monitor or TV. Heck, you can ho…
The RockBLOCK 9603 Accessory Cable is terminated with a simple 10-pin molex-style connector at one end and a bare wire pigtai…
These Adam Tech Wall Adapter Cables are terminated with a standard North American (NEMA 5--15P) plug at one end and three ins…
This is a simple two wire cable. One end has a 2 pin female 0.1" pitch connector. Opposite end has 2-pin JST connector.
Connect your pi-top [4] to your laptop, tablet, desktop computer or HDMI monitor.
This is a 300mm long Male TNC to Male SMA cable. This is an excellent cable for connecting one of our RTK development boards …
USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you're goin…
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
A U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable.
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
The LIDAR-Lite Accessory Cable is terminated with a simple 6-pin JST at one end and a bare wire pigtail at the other. The sam…
These extension cables have a type A male connector on one end that plugs into any computer. The opposing end has a *female *…
The UMCC - Ultraminiature Coax Connector is an ultra low profile coax female to female interconnect solution.
This cable is 150mm long and has two 2.5mm spaced connectors at its ends.
A simple ribbon cable with 16-pin female connectors, 200mm.
Testing surface-mount components with standard test leads is anything but easy. Everyone has their own method: some people ta…
